Question about 1997 GMC Suburban

1 Answer

98 gmc suburban brake lights

Third brake light works but the right and left brake lights dont, already replaced all bulbs and brake light switch and checked all fuses

Posted by on

  • hoopdog2469 Nov 21, 2008

    i think i found out that the turn signal/hazard switch is bad, but thanks for trying to help me

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 426 Answers

One of two things cause this corroded or poor chassis earth at the bulb holders or the circuit board that holds the bulb is faulty.

Posted on Nov 19, 2008

  • tony yeatman
    tony yeatman Nov 21, 2008

    Not sure how indicator and brakes are linked?Makes no sense?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the tail light fuse?


Rear Lights May Be Out Due To Failed Light Socket Plate ...

repairpal.com > Problems > GMC > Envoy
no tail light on passenger side. replaced tail light circuit board, fuses and bulbs. I havebrake lights ... 2003 GMC Envoy75,000Visitor. My brake light got ... How do I replace the high mount third brake light on a 2002 gmc envoy? The light does ...

Chevy Trailblazer- No Brake Lights! It's an easy fix.. - YouTube

? 12:22
https://www.youtube.com/watch?v=m0GkI5Jmrgo
Sep 7, 2014 - Uploaded by CheapGeek
My 2008 Chevy Trailblazer had no brake lights! It was ... Chevy Silverado 88-98 brake light switch replacement GMC Sierra tahoe Suburban ...

GMC Envoy XL: brake lights..the fuses and the bulbs..lights ...

www.justanswer.com > GM
images for 2003 gmc envoy wiring

Jan 17, 2016 | 2003 GMC Envoy

1 Answer

Break light on my 1998 gmc suburban does not work


Does the third brake light work?
If it does the get a test light and check the circuit inside the brake light. it can be the circuit board or the pig tail the not getting connection.

Jun 05, 2012 | 1998 GMC Suburban

1 Answer

I have 97 suburban that i changed the brake switch but the brake lights work intermintten what else could be the problom


this one is tricky. I know that gmc had a problem with the hazard button dropping out the brake lights except for the third light. There was a recall so you may be in luck if it includes your vehicle, or it maybe switch that detects the brake being depressed. I had that problem w/1999 Jimmy and my cheap fix was to jump each side off the third brake light. I used the top bulb in assembly and disconnected the wire that feeds the brake light but left running light wire on. Havent had a problem since.

Dec 11, 2011 | 1997 Chevrolet Suburban

1 Answer

Is there an adjustment for the stop light switch on a 99 GMC Yukon. I have replace it and my brake lights still do not work. Park lights work fine.


There is no adjustment. The park lights are on a different circuit than the brake lights.
Do you have a third brake light that works. Its also on a different circuit but works from the same switch. Do your turn signals work. They use the same filament as the brake lights.
Also, the brake light circuit goes through the multi function (turn signal) switch.

Since the brake lights and turn signal lights use the same filament in the bulbs, the brake light circuit will pass through the turn signal switch. When a turn signal is used it cancels out the brake light for that side.

Let me know if your third brake light and turn signals work in the rear.
Also, if youy have not already, check/change the bulbs. The type of sockets those lights are in also get burned so look at them well.

Oct 18, 2011 | 1999 GMC Yukon

1 Answer

I have a 1995 GMC Sierra an the third eye brake light comes on but the other brake light dont work


Could be both bulbs have burned out at once. Or could be the brake light switch. The third brake light and the normal brake lights operate seperatly. Or could be the wires.

Sep 01, 2011 | 1989 GMC Sierra

3 Answers

Brake lights keep blowing a fuse on a 1997 GMC suburban


i have a 95 gmc suburban that keeps blowing the fuse when break is aplied i even disconected the back lights and it does the same what could it be

Dec 21, 2010 | 1997 GMC Suburban

1 Answer

1999 GMC Suburban, K1500 4WD. Top brake light bar


third light is different circuit. saftey reason check fuses grounds wires

Oct 10, 2009 | 1999 GMC Suburban

Not finding what you are looking for?
Cars & Trucks Logo

367 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...