Question about 1996 Pontiac Bonneville SE CA Value

1 Answer

Good fuses no turn signal

I have 1996 bonneville the turn signals worked intermitently then stopped soon worked shortly now stopped alltogether i checked all fuses and none were bad however the hazzards still work

Posted by on

  • Anonymous Mar 19, 2014

    Checked out the fuses they were good
    Happy with




1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Pontiac Master
  • 1,779 Answers

I believe your car has 2 flashers, one hazard, one turn signal. Check the turn signal flasher to see if it's bad. Located driver side, upper steering column under dash. To make sure u check the correct flasher, try using the hazards after removal of flasher, so u know u have removed the correct one. Let me know how u do.

Posted on Nov 19, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1996 Toyota corolla keeps blowing dome fuse

Check the cigar lighter for a coin in it.Children put coins in there and it blows the fuse.

Mar 09, 2016 | 1996 Toyota Corolla

1 Answer

None of the blinkers work on my 1996 dodge stratus, all bulbs are good as the park lights and flashers work. I have three dead ports in fusebox under hood.

Guessed it's a V6. Trying to sort this out. If setting the headlamp switch to PARK turns on the park filaments of the front park/turn signal lamp and the tail filaments of the rear tail/stop lamps and the separate tail lamps, the park light circuit is good. If 20A fuse 6 in the power distribution center is OK, the combination flasher in the multifunction switch is receiving power. Power is directed to the turn signal lamps by operation of the turn signal/hazard warning switch. If the turn signals are not flashing, the combination switch may have failed or the turn signal flasher part of the combination flasher may have failed. Finally, the hazard warning switch causes the turn signal elements of the front combination park/turn signal lamps and the rear turn lamps to flash.

Sep 14, 2012 | 1996 Dodge Stratus

3 Answers

My 1996 mercury grand marquis wipers stopped working but the turn signal and washer sprayer button works what should i fix or replace?

check fuses if not that look for a short in the wiring near the wiper motor if you dont find one you probably need a new wiper motor,

Dec 04, 2010 | 1996 Mercury Grand Marquis

1 Answer

The turn signals work intermitantly

I start with replaising a signal swich

Apr 08, 2010 | 1996 Chrysler Town & Country

1 Answer

97 Sebring blowing turn signal fuse. I believe this is a common problem. The flasher and turn signal blows the # 6 fuse ( 20A). I fixed it once by larger amps. Is there a cause and fix

sounds like you have a short in your turn signals
(tip 1) replace the fuse with a 20 amp breaker instead of a fuse if it is a intermitant short it should reset instead of going out completly
(tip 2) before you put the breaker in put a fuse back in and try to make note which direction you are trying to signal when it blows this may help you isolate the short it will at least tell you the side of the car the problem is at unless it is under the dash if it turns out to be in wires to sockets which is common problem area .chances are great all you will have to do is check light sockets and wires to them on that side of car front and back.good luck and i hope this helps
feel free to contact me via email if you are unable to locate short.

May 05, 2009 | 1996 Chrysler Sebring

1 Answer

Turn signals not working

the relay is ussualy under the dashboard on the drivers side......

and some cars have it in the engine compartment by the wiper blades......

it could be the fuses....

Mar 24, 2009 | 1997 Pontiac Bonneville

2 Answers

Turn signals don't work but hazards do on 1995 bonneville pontiac


Try Check or replace the turn signal switch. It might have loose connections or its faulty.

Feb 08, 2009 | 1996 Pontiac Bonneville SE CA Value

Not finding what you are looking for?
1996 Pontiac Bonneville SE CA Value Logo

441 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides