Question about 1997 Mercury Grand Marquis

1 Answer

Keyless entry system problen

I got mercury grand marquis 1997 the problemis the control remote dont work how i reprogramm the control remote i hope u can help me to solve my problem just help me with instruction to reprogramm the control thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I you have your manual in there,If you know your door code input in your door code and prees 1/2 at the same time,then press any button on your keyless remote,then press 7/8.

Posted on Nov 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Factory installed anti theft & keyless entry system


If is the original key fob, you may need to reprogram it

Jun 29, 2014 | 1999 Mercury Grand Marquis

1 Answer

Some guessed my OEM keyless entry code. how do I keep them out of my car. Can OEM code be changed in a 1998 Mercury Grand Marquis?


Unfortunately there is a default code for these keyless entry systems, i do not believe that you can remove this default code from the system, my advice to you would be to check your owners manual...(if available) and read up on the keyless entry system for this vehicle, if there is no helpful information in there on this issue, then i would contact your local Ford/Lincoln/Mercury dealer and talk to someone there... but like i stated, unfortunately i do not believe the default code can be removed from the system.

I hope this helps, and good luck with your concern...

Sep 13, 2011 | Mercury Marquis Cars & Trucks

1 Answer

What is the color code for replacing the light switch on a '94 Marquis with factory alarm and keyless entry?


Here you go. I think this may be what you are looking for. I hope this helps and good luck.

1994 Mercury Grand Marquis Alarm, Remote Starter, Keyless Entry Wiring Information Constant 12V+ Yellow Ignition Switch Harness Starter White/Pink Ignition Switch Harness Ignition Red/Light Green Ignition Switch Harness Accessory Gray/Yellow Ignition Switch Harness Tach Gray/Orange EDIS Module Brake Switch Light Green Brake Switch Trunk Release Purple/Yellow Driver's Kick Panel Trunk Pin Brown/White (-) Light in Trunk Parking Lights Brown Light Switch Head Lamp Red/Yellow Light Switch Hood Pin n/a Factory Disarm n/a Door Trigger Black/Light Blue Driver's Kick Panel Door Lock Pink/Yellow Behind Glove Compartment w/Keyless w/o Keyless (-) Door Unlock Pink/Light Green W/o Keyless Reverse Polarity Horn Wire Yellow/Light Green (-) Steering Column Windows Up LF=Yellow, RF=White/Yellow, Windows Down LF=White/BlackRF=Tan/Light Blue

Mar 26, 2011 | 1994 Mercury Grand Marquis

1 Answer

My door lock remote will not function and new


have you tried to press/hold lock button for 30 secs.
the code changes everytime you use the remote so that only your remote unlocks your car,not everybody elses.the key has a code inbuilt into it so the car will only start with your key...(this is dealer programmable)

Apr 05, 2010 | 2000 Mercury Grand Marquis

1 Answer

Power locks, and keyless entry pad do not work. all fuses are good. 92 mercury grand marquis


if the battery in the entry pad is good then it needs to be reprogramed or the remote sensor is blowen

Jul 08, 2009 | 1992 Mercury Grand Marquis

1 Answer

I need to program the key fob


. Enter 5-digit permanent entry code into the keyless entry driver door keypad. 2. Within 5 seconds of pressing last button of code, press the 1/2 button. All doors will lock then
unlock confirming you are in programming mode.

3. Press any button on first Keyless Remote within 5 seconds of pressing the 1/2 button. Locks will
cycle to indicate succesful programming.

4. If you are programming more than one Keyless Remote (Including any exsiting remotes) Press
any button on second keyless remote within 5 seconds of previous remote. Locks will cycle again
to indicate succesfull programming. (If the keypad light goes out before all remotes are
programmed the entire process must be repeated).

5. Press the 7/8 and the 9/0 buttons simultaneously on the keypad to exit program mode.

Jun 29, 2009 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
1997 Mercury Grand Marquis Logo

Related Topics:

290 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...