the SRS light and engine light remains on, Also what can I do about my drivers seat belt will not catch within the seat belt latch. Should the red catch part be replaced? The vehicle is running fine as much as I can tell, I just can deal with the lights remaining on. I started burning regular gas when the price went through the roof, should I try and use only premium?
Comments:
Nov 20, 2008
- So, allow me to understand this clearly, you would like for me to provide you with free details on how I solved the problem, but you would like to charge me for advise!!! You must have allowed the hood of the vehicle to drop on your head. Thanks but no thanks! Have a blessed day
If you have oxygen sensors fitted to the vehicle (wires coming from front of exhaust)then the fuel could be causing the engine light to come on.SRS light is probably caused by your seat belt catch not working , you could maybe find a good used part at a breakers yard.Check that the wires are o.k before buying.
1998 range rover p38 2.5 dse auto engine stalls when select d or rev from park and also can stall...
(More)
1998 range rover p38 2.5 dse auto engine stalls when select d or rev from park and also can stall when slowing down or pulling away from junction or lights when warm . neutral / park can be lumpy on tickover. seems fine when cold with no start or restart probs
range rover p38 changed rear air bags put new pump on but wont come up off bump stops cant find any...
(More)
range rover p38 changed rear air bags put new pump on but wont come up off bump stops cant find any leaks pump has very good pressure i think that the air is not getting past the valve block ?
Hi, I've just bought a 2nd hand wrap around bull bar for my p38.It's a genuine land rover part...
(More)
Hi, I've just bought a 2nd hand wrap around bull bar for my p38.It's a genuine land rover part complete with brackets bolts etc.I can see where the longer bolts fit in to replace the existing bolts that hold the bumper on,but there are 2 more brackets with bolts and I can't see where they go. Do you have to remove the bumper completely to gain acccess to more holes etc underneath.I fitted quite easily an A bar to an earlier p38 that I had .No problem Help!!