Question about 2000 Ford Focus

1 Answer

Ford telsta wont start when warm

1986 telsta 2 litre starts fine in the morning but not when warm

Posted by on

  • yadayada
    yadayada May 11, 2010

    Have you checked for diagnostic trouble codes? have you checked for spark loss when it won't start? how about fuel pressure? Check these items and get back to me with what is going on.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 38 Answers

Could be crank sensor breaking down when hot causing no spark

Posted on Dec 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is My 1986 ford f150 starts great in the morning but after hot it's like it's not getting fuel


What have you checked so far ?
Fuel pressure ? Fuel pump relay ? Good spark to plugs ?

Sep 05, 2014 | 1986 Ford F150 SuperCab

1 Answer

Wont start when warm


lupo 1.4d wont start when warm

Jan 11, 2014 | 1986 Ford Bronco

1 Answer

P2285 code 6.0 litre ford deisel long cranking before starting after starts runs great but oil pressure gauge drops at idle


bad bearings on crank or worn oil pump. Pressure will be up when cold, but will drop when engine warms up. Check for knock in lower end. If so, bad crank bearings.

Jan 16, 2013 | 2004 Ford Super Duty F 550

1 Answer

86 ford f250 the truck wants to stall when warmed up and once warmed up it wont start back up until cooled down


I had a truck that acted similar and it turned out being the coil! It ran fine on idle but once it warmed up it missed and had trouble starting. Good Luck!!

Mar 17, 2010 | 1986 Ford F 250

1 Answer

1986 camry ran fine this morning went back out to start it and it wont start now. There is a humming noise from the engine but it wont turn over.


starter motor m8 hit it with a RUBBER handled hammer wilst someone turns the key or bumb start it, when it goes the problem shouldnt come back but if it does the starter needs replacing


rubber handle is vital our your gonna get a shock!

Jan 05, 2010 | 1986 Toyota Camry

1 Answer

2006 f350 wont start if warm


It is Vapor Locking at the Pump. The O rings are Swelling too much and will not allow the fuel to leave the Pump or enter the Injectors.
Ford knows of this Problem. Call a Local Mechanic He will have to Fix the Problem

May 12, 2009 | 2006 Ford F 350 Super Duty

1 Answer

Have a 86 ford ranger 2.3 l 4cy in mornings


its your fule filter theres 2 of them i the 86 ford ranger you need to change them the location of the fule filters are on google just tipe in fule filter 1986 ford ranger location it should pop up there about 8 dollors a peace easy fix and your truck is like new also get a new battey if you havent k have a good day. oh i know this because i own one had the same problem

Apr 02, 2009 | 1986 Ford Ranger 2WD

1 Answer

'93 Aerostar-stalls while driving/scary-stalls in 'drive' at stops


Wow!!! Now that's a headfull of problems....
This could be a great many things...
Check these before you sell. I have a '93 Aerostar and can't live without it.
1. Check idle speed
2. Fuel filter may be clogged or water in the fuel system.
3. Choke improperly adjusted or sticking.
4. Distributor components damp or damaged.
5. Faulty emissions components.
6. Faulty or incorrectly gapped spark plugs/ Also check wires.
7. Vacuum leak at the carburetor/fuel injection unit or vacuum hoses.
8. On 1986 models, stalling during idle or deceleration may be caused by sludge in the throttlebody. (2.3 litre engine)
9. On 1986 & 1987 models with a 2.3 litre engine,hesitation or stalling during acceleration may be caused by carbon build-up on the intake valves.....I hope this helps!! Adios

May 23, 2008 | 1993 Ford Aerostar Extended

Not finding what you are looking for?
2000 Ford Focus Logo

Related Topics:

107 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...