Question about 2002 Dodge Ram Maxi

2 Answers

DASH LIGHTS WON'T COME UNTIL---! 1988 PLY VOYGER 3.0

I HAVE TO HIT THE TOP PART OF MY DASH BOARD IN ORDER FOR MY DASH LIGHTS TO COME ON. ON BUMPS THEY GO OUT AND STAY OUT, THEY WILL NOT REURN NO MATTER HOW HARD OR HOW OFTEN I HIT THE DASH BOARD, UNTIL THE NEXT DAY OR TWO.AND THEN I HAVE TOO HIT THE DASH BOARD AGAIN TO GET THEM TO COME ON. ARE THERE ANY TSBS OR KNOWN PROBLEMS WITH THE 1988 PLYMOUTH VOYGER 3.0L, HAVE YOU ENCOUNTERED THIS ISSUE BEFORE? ANY ADVICE WELCOMED!

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 68 Answers

U might have a loose wire or a blown fuse

Posted on Nov 19, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Dodge Master
  • 959 Answers

Either the harness on the cluster is loose somehow... or a bulb ( hooked up in series?) is blown.
Dash lights and tail lights are usually on the same fuse... so check and see if you have tail lights when next this happens.

Posted on Nov 19, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need location of cruise control image for 2005 GMC. Turns off when hits bump.


Do you have a air bag light on the dash ? Check ground circuit for lose connection . Ground G203
In the I/P harness, on the left side of the I/P near the A-pillar below the I/P top cover .

Sep 14, 2016 | 2005 GMC Sierra

1 Answer

Driver side fog light wont stay on


CLearly a connecting issue. Check wiring pins

Mar 12, 2014 | Mazda MAZDA3 Cars & Trucks

1 Answer

Dash lights and radio lights sometimes work or flicker when hit a bump. Any ideas?


Might be a loose battery cable. Just a thought. did see other post where you stated that you've disconnected battery several times. Hope you find/found a solution.

Mar 13, 2013 | 1998 Jeep Grand Cherokee

1 Answer

I have a 04 Toyota Tacoma. I have short in the dimmer switch.


It cold just be a fuse that is loose in the fuse box causing the dash lights to come on and off. Or potentially a loose wire from the fuse box the dash lights.

Oct 07, 2009 | 2001 Toyota Corolla

1 Answer

Hit a bump and lose all dash electronics. Was


definately electrical connection problem.wiggle fuse box and wires w/ car on in park to see if problem occurs.Check ground wire connections under dash and on other side of firewall/bulkhead.Sometimes ground posts corrode or loosen.An exposed +wire may be bumping or touching metal.You'll have to carefully move wires around under dash untill you see the problem occur

Sep 11, 2009 | 1984 Chevrolet Corvette

1 Answer

Yoy can jump the truck off, but wile you are


It is probably a loose ground wire. If it only does it while hitting bump, then there is a loose wire somewhere. It may be loose fuse but probably loose wire or solder joint going to dash control board

Jul 02, 2009 | Chevrolet Crew Cab Cars & Trucks

1 Answer

Intermittent dash failure 99 dodge caravan


take out the screws in the top of the cluster.remove the cluster.it is a double sided pc board and there will be broken solder joints on the back side of the pc board.resolder all the pins if you can solder,if not take it to an electronics shop and have them solder it.

May 14, 2009 | 1999 Dodge Caravan

1 Answer

Blower fan goes off with hitting a bump


Check to see if any of the wire connections are loose.

Neil

Mar 14, 2009 | 2004 Pontiac Grand Prix

1 Answer

Headlight and hazard light and horn and aftermarket radio,


Check your neutral safety switch. I had the same problem during a hard rain, hit a bump and everything went out.

Feb 28, 2009 | 1988 Chevrolet Nova

1 Answer

Remove dash board to replace burnt light bulbs


remove steering wheel (17mm hex nut)
remove screws from dash cluster(3 on bottom. 2 on top)
Unplug connections to cluster
Tilt towards you and pull up, and that it!
Trust me , you want to take the steering wheel off , makes the job much easier!

Dec 26, 2008 | 1988 BMW 3 Series

Not finding what you are looking for?
2002 Dodge Ram Maxi Logo

Related Topics:

196 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...