Question about 2004 Dodge Ram 1500

2 Answers

Stalling issue I have a 2001 Dodge Ram 1500, the truck stalls out when gas pedal is released, giving "p done code" only. All my gauges and lights work properly. When engine light comes on, it doesn't stay on. I'll start it up, let it stall out, and with the key still on, I'll get that "p done" code. Thats it.

Posted by on

  • tomroan Dec 13, 2008

    my 2001 ram will crank but idles rough. it misses showing a miss on number 5 cylinder. when you are in town driving it will go dead it will crank but is real sluggish on take off. i replaced plugs and wires. checked for vacuum leaks none found. any suggestions

  • yadayada
    yadayada May 11, 2010

    Not sure what you mean by this code?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Is the code p0406? if it is replace the egr valve. i have a 2005 ram 1500 and just went through the same thing.

Posted on Dec 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 74 Answers

Check for vacuum hose leak, listen for hissing sound a can a carb spray may assist you in finding this by spraying the hoses and watch for change in idle, this may not show a code if it not a constant problem. under load its ok when it tries to idle the vacuum leak will stall the motor..

Posted on Nov 21, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 dodge ram 1500 brake lights not working when truck is running


When truckis not running, brake booster is not functioning and therefor the pedal goes down further and the brake switch functions. When running and booster is working pedal does not go down so far and light switch is not released enough to work. Adjust light switch at brake pedal.

Jan 27, 2015 | 2004 Dodge Ram 1500

1 Answer

2001 Dodge 1500 4x2 stalls when gas pedal is depressed


run fault codes to check for faulty accelerator position sensor. Have a fuel pressure test done on the manifold to check for fuel pump/ filter/ fuel regulator problems.

Oct 25, 2013 | 2005 Dodge Ram 1500

1 Answer

2001 dodge intrepid stalls when warm and i,m not in the gas pedal. Why?


there could be a couple of things causing the engine to stall, most common would be a large vacuum leak, check all vacuum hoses under the hood paying close Attn. to the large hose going to the power brake booster,but the most common thing to cause a idle stall is a idle control motor some times it is called an idle air motor.

Feb 27, 2011 | 2004 Dodge Ram 1500

1 Answer

01 dodge ram 1500 5.2 4WD code P0455 evap system leak.


This code will not stall or no start of your engine, evap only work when engine is off, it is to reduce the fume your gas tank lets out to protect the o zone, but it will not pass Emission test, also could be some thing a small as your gas cap not sealing right.

May 27, 2010 | 2001 Dodge Ram 1500 Truck 2WD

2 Answers

2001 ram 15oo, speed,tach,oil press,batt,fuel gauges all stopped working at once. message on odometer says--no buS . no noticeable difference in engine performance.


i am having the some problem with my 2001 dodge ram 1500 all of my gauges stop working after the engine light came on now on myodometer says no bus, Can you help me with it

Jul 17, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2001 ram dash gauges not working odm reads no bu5


check fuse the abd and air bag lights make sure that the fuses is not loose.

May 01, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1999 Dodge Ram 1500 2WD won't shift properly


Sounds like the speed sensor on the rear axle.

Jan 20, 2009 | 1999 Dodge Ram

1 Answer

2001 dodge ram will not idle stalls in lower rpm


its not the fuel filter sounds more like a bad ais motor

Dec 14, 2008 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

2001 dodge ram 1500 brake lights


I would guess the brake fuse ( this does not use the same fuse as the tail lights/blinkers) or the ground for the brake light bulb.

Aug 13, 2008 | 2001 Dodge Ram 1500 Truck 2WD

Not finding what you are looking for?
Cars & Trucks Logo

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...