Question about 2008 Mitsubishi Lancer GTS CVT Sedan

1 Answer

RESETTING THE TRIP METER

Recently bought a Lancer 2008, no manual in the car. I want to know how I reset the trip meter. I like to do that when I full my gasoline tank. Also would like to know how can I get a manual for my car. Thanks.

Posted by on

  • adecar46 Nov 19, 2008

    Hi. I hope this message is seen by FreakinWilly. Thanks a lot. I tried your solution and it works perfectly. I would like to find out some guide in using all the dashboard panel. Do you know how? Thanks again. Adelaida Rivera adecar46@hotmail.com

  • Anonymous Mar 20, 2014

    trip guage resets everytime I tu my car off

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Press the info button until you see Trip A or Trip B. Once you are looking at the Trip meter you want to reset, press and HOLD the info button. After 3 seconds, the dashboard will beep and the Trip meter will reset to zero.

Posted on Nov 19, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is fuel pump located mitsubishi lancer 1997


since carburetors were replaced by fuel injection, about 1991, just about all gasoline fuel pumps were moved inside the gas tank and are electric.

Jun 29, 2011 | 2006 Mitsubishi Lancer

1 Answer

Trip meter reset problem


lol, push the button and hold it in for a second

Nov 27, 2009 | 2008 Dodge Caliber

1 Answer

I CAN'T PUT GAS IN MY 2003 LANCER


Your evap charcoal canister is full from being overfilled. The biggest problem with "topping off" is that it can wreck the evap system.
This system collects gasoline fumes from the tank and routes them to the engine for combustion.
Overfilling could force raw gas to enter the system and prevent it from working right. It could also cause a condition where you have a hard time filling the tank, as the system can't properly relieve pressure from the tank and the gas pump's automatic shutoff keeps engaging.

You will need to replace the canister for the fix.

Thanks for using FixYa - a FixYa rating is apprecited!!

Feb 23, 2009 | 2003 Mitsubishi Lancer

1 Answer

Maint. light reset


This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Jan 02, 2009 | 2008 Toyota Camry

2 Answers

Service reminder


You can reset it manually. Make sure the car is off, then click the ignition over to ON (do not turn over the engine). Press the INFO button until you see the service reminder (should be a wrench with 3 dashes by it). Once you see this, press and HOLD the INFO button for 3-5 seconds. The reminder should add 6 months and 5000 miles.

Oct 15, 2008 | 2008 Mitsubishi Lancer GTS CVT Sedan

5 Answers

Reset oil maintenance light in 2008 toyota highlander


  1. Set the "ENGINE START STOP" or engine switch OFF with the trip meter A reading shown.
  2. While pressing the trip meter reset button, set the "ENGINE START STOP" switch or engine switch ON.
Without multi-information display

  1. Continue to press and hold the button until the trip meter displays 000000.
With multi-information display

  1. Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
there you go jimmy mark as fixya

Sep 26, 2008 | 2008 Toyota Highlander

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,001 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...