- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
definetly tire prssure low light. you can reset it by scrolling through the mileage and trip meter once you get to the screen for the tire preesure monitor hold the button down till it flashes and it will reset. make sure you check all your tire pressures first.
the last time I had a flat the tire pressure monitor came on a little too late. once the tire was replaced and brought up to pressure it reset itself. check your spare tire. have the tire that was repaired still has the module on the rim. they may have given you a different rim
The " Check Engine" pertains to the computer sysytem informing you of a failure code stored. In order to clear , the problem must first be solved, and then clear the computer. Tire prssure warning light advises of low air pressure in any of your tires. Check tire pressures. A fault in a particular tire valve sensor may also indicate a fault if all pressure are up to spec
Vehicles Without Message Center
To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset procedure is complete.
Vehicles With Message Center
To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete.
If you have the silver-metal valve cores, on the rims, there is NO reset proceedure. Under the valve cores is a transmitter, which is battery powered. It sends a "yes/no" signal to the tire pressure ECM. Note that ALL 5 tires transmit to the ECM. The signal is "at or above" the specific target pressure needed, or is is below the target pressure. What to do: get a GOOD tire pressure gauge, not those cheap ones that look like pencils. Set the tire pressures to the specification, INCLUDING the spare. Your light should go out. If not, there is the possibility that one of the sensors is innoperative, and that will involve a trip to the dealership, to get it replaced under warranty. Try the tire pressure resetting, adn don't forget the spare. Get back to me if this works. Glad to help, and thanks for choosing FixYA.