Question about 1994 Chevrolet S-10 Blazer

3 Answers

Turn signal relay switch, 94 s10 chevy blazer

I have looked under hood, in fuse box, under stearing wheel, beside hazard switch, behind glove box, beside lighter.... all but taking off whole dang dash assembly! i have read chilton and haynes. I went to autozone, checker, pepboys and napa! i do not have a owners manuel.
Please Help!

Posted by on

  • amybelliott Mar 13, 2009

    when i turn the lever to turn left it stays down and won't turn off after I turn the car and the light just stays on, doesn't blink.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

The Turn signal relay on a 94 s10 blazer is located under the cluster area right behind the panel that holds the parking brake release handle you will see it once a couple of trim panels get remove it will be to the right side of the brake release handle

Posted on Dec 03, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 959 Answers

Did you check on the inner firewall of fender?

Posted on Nov 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 91 blazer my gas,water,battery andrpm gauge doesnt work,the only thing that lights up is my turn signals and speedometer. i had 2 blown bulbs which i replaced. still no lights behind them please help

Posted on Mar 28, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is the hazard warning flasher


it should be under the dash near the steering and brake pedal area, turn them back on and listen for it it is up on the left side it is about a 1 sq inch block type looks just like a relay that is under the hood in the fuse realy box

Mar 20, 2014 | 1994 Subaru Legacy Outdoor

1 Answer

1997 chevy 3500 truck all lights work besides the hazard lights. I replaced all fuses and head light switch and also turn signal switch. I have also checked all wires under dash.


Try replacing the flasher.I can't remember if a 97 has a separate hazard flasher or a multifunction type.(my 99 Chevy work truck has a multifunction type-a little black box resembling a relay in the under-dash fuse panel).

Oct 02, 2013 | Cars & Trucks

2 Answers

Where is the turn signal relay on an escort 1992


you have a fuse box under the dash and a fuse/relay box under the hood.
Althou many cars will place the flasher/blinker relay under the dash near the brake pedal, and still, some are behind the radio (farther back and close to the floor)
here is the relay you are looking for.
12_14_2012_3_59_39_am.jpg
You can turn on the hazard flashers and listen for the ticking sound the flasher makes. Follow the sound and look for a small round or square piece. (the flasher)
You should have one for blinkers and one for hazards.
This flasher is most often the problem.
Relay may be in the area if not under hood.

Dec 14, 2012 | 1992 Ford Escort 4 Door

2 Answers

I have a 1996 chevy s-10pick-up truck my blinkers are not working 4-way flashers are ok,fuses are ok,light bulbs are ok.where is the relays or flasher?


Flashers are generally located either under the dash (they hide them behind the horizontal panel) under the hood in the fuse box.

Also, relays can be hidden under the hood or in the fuse box.

The interior fuse box is where the 'turn signal' fuse is located.

Circuit Protection Fuses Underhood Fuse Block (Base) gm_truck_s10_undr-hd_fs-blk.gif

gm_truck_s10_undr-hd_fs-blk_chrt1.gif

gm_truck_s10_under-hd_fs-blk_chrt2.gif

Underhood Fuse Block (Except Base) gm_truck_s10_up-lvl_pk-up_fs-blk.gif

gm_truck_s10_up-lvl_pk-up_fs-blk_chrt1.gif

gm_truck_s10_up-lvl_pk-up_fs-blk_chrt2.gif

gm_truck_s10_base-pu_undr-hd_fs-blk-3.gif

I/P Fuse Block gm_truck_s10_i-p_fs-blk.gif

gm_truck_s10_i-p_fs-blk_chrt1.gif

gm_truck_s10_i-p_fs-blk_chrt2.gif

gm_truck_s10_i-p_fs-blk_chrt3.gif

prev.gif next.gif

Jul 19, 2010 | 1998 Chevrolet S-10 Pickup

1 Answer

Problem with my 97 Chevrolet S10 Blazer


I'd look into the multifunction switch. That controles both hazard and turn.

Dec 12, 2009 | 1997 Chevrolet Blazer

1 Answer

Where is the turn signal relay on a chevy s10


On 95-97 and 1998, both the turn signal and hazard flashers are located behind the lower dashboard trim just to the left of the cigarette lighter. You can not get to it without taking apart the trim (stupid design). Or you have to drill a 2" diameter hole in the trim with a velcro cover so you would never have to do it again1999 and later it is under the glove compartment
to disassemble it without drilling
It's behind the panel to the left of the cigarrette lighter. You need a Torx 25 screwdriver and another screwdriver for those hex shaped screws, forgot the size. First unscrew the 2 Torx 25 screws beneath the steering wheel. Then unscrew the rest of those Hex screws on the bottom. The panels overlap, so be prepared for a lot of unscrewing. You do need to unscrew the middle black panel on the bottom, right beneath the cig lighter. It's held by two Hex shaped screws, one on each side and are hard to unscrew. Also you need to remove your spare change sliding tray to unscrew the last hex looking screw. Once you pop your panel off, the turn signal flasher is the right one. The Hazard flasher is the left one. You can find a replacement part at Autozone, and DON'T get the $184 Flasher switch, all you need is the signal flasher. It's shaped like a cylinder with TWO prongs on it.

Nov 03, 2009 | 1994 Chevrolet S-10 Blazer

1 Answer

Are the turn signal relay and the hazard relay in a 1989 Lincoln Town Car without tow package different parts? The hazard relay is mounted on the fuse panel and it ticks when the hazards are turned on, but...


you should have two of the same part,one for the hazards,one for the turn signals
turn the signal lights on wither direction and listen for the sound follow it and you will find it.
If not look in three places two in the fuse box or aroung the general area,up on top of the steering colunmn and behind the glove box,sometimes you have to remove the inside glove box and it can be to the left of the hole,if you dont see it look harder and put your hand brhind the dash to feel for it,it sounds crazy I know.

Aug 12, 2009 | 1989 Lincoln Town Car

1 Answer

Turn signal relay switch, 94 s10 chevy blazer


It's behind the dash panel just below the steering column. There are two relays for the fuel pump back there. Chande them both out.

May 27, 2009 | 1994 Chevrolet S-10 Blazer

5 Answers

Turn Signal Flasher location in 93 Mustang GT


The flasher is a small round plastic cylinder (unless replaced with a metal one) behind the left edge of the glove box that will look similar to the one in the fuse panel. The first step is to squeeze gently both sides of the open glove box and let it swing downward. It will be snapped into a metal horizontal brace just to the left of the glovebox opening by a small tab and have two wires attached. The number more than likely will be a #552 although I have seen a factory one with a Warner #224

Feb 11, 2009 | 1993 Ford Mustang

2 Answers

Turn Signal Flasher


58940048Its behind the center of the dash under the Ashtray U need TORX screwdrivers to take out the screws got to take off nearly all over the under dash plastic trim.
Contact me if you need more help Thanks

Jul 31, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1994 Chevrolet S-10 Blazer Logo

1,827 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...