Question about 1995 Chevrolet S-10 CA Edition

1 Answer

How do I replace a 1995 Chevy truck heater core, 1500, 2WD, 5.7L

Need to know if I have to pull the dash. Also, is there anything out of the ordinary I need to know?

Posted by on

  • cybrhawg Jan 20, 2009

    Heat core is leaking into the cab.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Heater core replacement 98 chevy S10 2.2L engine


Tyrone, Check the attached links,instruction and guides, the last link has some very good info. and pics. on S10 heater core replacement. Good luck.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Heater core replacement 2000 S10 4 3L slideshow picture
How to Change Heater Core on 1994 Chevy 10 Blazer GMC Jimmy Oldsmobile...
98 GMC Jimmy Heater Core Replacement Video Diary
Heater core replacement procedure 99 S10


Jun 16, 2016 | Cars & Trucks

3 Answers

How do you replace a heater core on a 95 impala ss


How to Replace the Heater Corein a Chevy Impala

Replacing your Chevy Impala'sheater core is no easy task. There are several parts you must carefully removeor reposition to disconnect the core from the heating, ventilating and airconditioning (HVAC) module. This module and the core are located behind thecar's floor ducts.

1. Jack up the car and drain the Impala's cooling system.Loosen the water pump's drain bolt and let the coolant drain into a pan. Closethe drain bolt and lower the car afterward. 2. Remove the heater outlet and inlet hose from theheater core (reposition the hose clamps to do so). Take off the right consoleextension panel, body control module and left side extension panel on the frontfloor console 3. Disconnect the leftinstrument center support bracket (pull away the carpet at its bottom to reachthe nuts). Remove the accelerator control pedal from its position in the frontof the dash. 4. Disengage the center floorducts by raising the outlet duct while pushing the ducts down. Rotate theoutlet duct forward in the car and pull down to remove it from the HVAC module. 5. Use a small chisel to removeall the heat stakes from the heater core cover. Loosen the nut behind the fuelline bracket. Remove the dash panel's stud at the heater hoses. 6. Pull the core's cover downenough to reach the HVAC module's locating pins. Slide the cover rearward untilthe drain tube clears the dash front. Remove the cover by sliding it down,rearward, and to the right. You can now remove the core.
Installing the New Core
1. Install the new core into the HVAC module,attaching a new seal onto the drain tube. Attach the core cover from the rightside, sliding it up and forward into position. 2. Align the draintube with the front dash hole and the core cover holes with the HVAC locatingpins. Install the core cover screws, cutting and folding back the soundinsulator near the center screw to ease that screw's installation. 3. Reinstall the dash panel stud at theheater hoses, tightening the nut behind the fuel line bracket. Align the centerfloor duct with the HVAC and push it up while rotating rearward to install it.Put the floor ducts and outlet duct back into the Chevy Impala. 4. Attach theaccelerator control pedal. Pull the carpet back and position the left centersupport bracket, then tighten the bracket nuts. 5. Reconnect theleft side front floor console extension panel and the body control module tothe car. 6. Put on the outlethose and inlet hoses to the core, securing them with their clamps. Refill thecooling system with the proper mixture of water and coolant.
Read more: How to Replace the Heater Core in a Chevy Impala ' eHow.com

Nov 10, 2010 | 1996 Chevrolet Impala SS

1 Answer

How do i replace the heater core on a 2001 chevy silverado 2500


pull the dash off theres the heater core on passenger side theres a inlet and outlet hose pull both off remove mountin bolts install new one reassemble dash

Sep 13, 2010 | 2001 Chevrolet Silverado 2500

2 Answers

Do i need to pull my dash to replace my heater core in a 2001 chevy silverado ext cab


You will need to pull the dash and a bunch of other components in order to access the heater core. Getting ready to do the same repair and really not looking forward to it.

Jan 07, 2010 | 2001 Chevrolet Silverado

1 Answer

Heater core replacement


You do not have to do anything with the air conditioning, its all inside car under right side of dash. 1. go under hood and unhook heater hoses and bracket( if equiped) from core tubes. 2. go under dash right side remove 13mm bolt far right under dash thats so you can pull dash out a little ways to get cover off heater where heater core is.3. 1/4 in. socket set and 1/4 in. socket take screws out holding cover on look close there is one hidden top far right can't remember how maney 5 or 6 i think, screws all out use a little finess and remove cover and there will be your heater core. Good luck.

Apr 13, 2009 | 1995 GMC Jimmy

3 Answers

Replacment of heater core on 01 chevy S-10


Have replaced my heater core in my 2001 regular cab 4wd in december 2009. Had to pull the complete dash including the complete metal dash behind the dash that you see. Also had to remove the right passenger side inner fender well to acess the remaining two bolts that hold the heater core cover to the firewall. Its an insane job to do but the repair shop books call for 9 1/2 hrs to do the job. I'm not an expert but this is what it takes.

Mar 01, 2009 | 2001 Chevrolet S-10

1 Answer

1988 Chevy Blazer Heater Core Replacement


first determine if the heater core is located high or low by raising the hood checking against the firewall {by following the heater hoses to the fire wall} if it is high need to remove the dash. if it is low get on your back and start removing clips and screws no special tool needed.

Feb 14, 2009 | 1998 Chevrolet Blazer

1 Answer

1988 Chevy Blazer Heater Core Replacement


I replaced mine and only took out the glove box.

Jan 14, 2009 | 1995 Chevrolet S-10 CA Edition

2 Answers

Heater Box Removal To Replace Heater Core


heater box comes out via the eng side of the fire wall there are a couple of screws but not sure were should be no need to pull dash out

Oct 04, 2008 | 1995 Audi A6

1 Answer

1995 Chevy 1500 p/u heater core


nope pretty simple take off the heater hose clamps and the hoses from the engine side of the firewall. Under the dash on the pass. side, remove the lower panel screws pull cover down and the heater core should come out of heater box. reverse to reinstall

Jul 14, 2008 | 1995 Chevrolet C1500

Not finding what you are looking for?
1995 Chevrolet S-10 CA Edition Logo

1,923 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...