An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert that has 1 follower.
Re: 2006 Honda Accord Dome Light
Lok real carefull at the lense there will bee two little slots in the lense between the cover and the trim you can use a pockett screw driver or a butter knife and pry open the lense away from the trim it well be a little stuborn but dont worry you wont crack the lense
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check the dome light override switch lockated on the dome light itself, then check the fuse for "CTSY Lights" and finally, check the ground attachment by removing the lens cover of the dome (roof) light, an removing the plastic housing of the dome light by either removing a screw, or simply prying on the sides of the plastic housing, you should see a wire screwed into the roof metal.
You will have to pry off the lens CAREFULLY using a small screwdriver. There are two little plastic protrusions on each long side of the lens which fit into the casement. You can ease the casement away from the lens enough to get it to pop out. Re-inserting it is the same, but probably easier.
Gently, give it a try.
Hope this helps you.
I have no experience with this particular car, but on most cars' dome lights if there are no screws visible, the clear lens itself pops out. Try this with a flathead screwdriver or a quarter. Try doing this to each side with gradually increasing pressure.