Question about 1996 Chevrolet Blazer

1 Answer

Chev blazer 1996 fuelpump will damage why.?

I was on the sgnal sudden it got off and i have asked manchanic to change the phmp itself without full set. is it ok.. and one note: that after it fixed the pump new i found one problem yet. earlier whenever i wanted to start the blazer it was with in kick smoothly but new pump fixed it takes 2 to 3 kicks to start and that too it sounds while start much thicker than eariler. please advice me what i should do.?


thanks for support

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,450 Answers

Let me see if i understand your question. You had a fuel pump installed. went with aftermarket pump instead of replacing whole module? before when you started it would start first try and now with new pump it takes two or three times? This happens a lot with aftermarket pumps as the check valve does not hold fuel in line as good as gm pump. so after sitting overnight you are having to pump the fuel back up thru lines.

Posted on Nov 18, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Won't start

first you should make sure the fuelpump is working will hear a slight buzz when turning key on without cranking.if not its defective... happened to me with my 1996 blazer...if its good then check fuelfilter

Feb 28, 2016 | 2000 Chevrolet Blazer

1 Answer

Sensor light on a 95 chev blazer now on after heater core replacement

You have something disconnected somewhere after the dash was removed to replace the heater matrix ,the ABS computer is the only one which will reprogramme itself without any software but somewhere a multiplug is adrift iam sure

Oct 20, 2012 | 1995 Chevrolet Blazer

1 Answer

I have a 97 blazer starts fine stalls at 230deg starts when cool

Check the electronics in the distributor. Chevs are notorious for the electronics going bad inside of the distributor.

Jun 01, 2010 | 1996 Chevrolet Blazer

1 Answer

How do i change a faulty evap selinoid

the evap solenoid is located on top of the fuel tank......if you are going to change it you should go ahead a put a new fuelpump module in there it comes with the solenoid ......the only way to access it is to drop the fuel tank.....hope this helped

Sep 20, 2009 | 1996 Chevrolet Blazer

1 Answer

Abs brake keeps coming on every time the brake is applied

you may have damaged a ABS wheel sensors doing your brake job, check for a damaged or shorted lead to your wheel sensors... back side disc rotor, on spindle..

Aug 09, 2009 | 1996 Chevrolet S-10 Pickup

1 Answer

96 Chev S-10 Blazer

you might try a new coil/coil pack, it sounds like your not getting enough spark to the plugs

Apr 27, 2009 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

73 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides