Question about 1995 Oldsmobile Aurora

1 Answer

Replace the Passenger Headlight

Need a schematic of the headlight. Not sure what all needs to be replaced. The piece that holds the headlight in itself is broken. Also the clamp that holds the bulb in is broken.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

How do you go about pulling the lens so you can put in a new bulb

Posted on Dec 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 VW Beetle: the locking mechanism on the passenger side headlight seems to be missing a plastic piece. What is is called and how do I fix it?


The whole heldlamp assemble is what they call the composite assemble,what part you need are for the carrier,this includes the locking mechanism,8_12_2012_8_30_55_am.jpg

Aug 11, 2012 | 2008 Volkswagen Beetle

1 Answer

How do you change the headlight


On a Newer Vehicle you'll replace the Headlight Bulb
Open the engine compartment hood.

Locate the back of the headlight to determine the lamp and bulb type.
Decide which bulb you need to replace.
Purchase the correct bulb for your headlamp.
Behind the headlight the lamp the socket is removable.
Remove Socket then replace lamp (bulb).
Carefully re-install the socket


On Older vehicles:


Remove the screws that connect the headlamp frame to the
bracket holding the headlamp. Make certain you turn only
the screws that hold the lamp frame, not the adjusting screws.
Disconnect the electrical connector in the back of the lamp
by pulling the socket away from the headlamp with your hand.
Remove the headlight from the bracelet area and discard it.
Replace with the new headlight, making sure that it is positioned
right side up.
Plug the wire socket into the new headlight, which holding the
headlight securely.
Replace the headlight into the frame.
Place the frame onto the headlight bracket.
Reattach the screws to hold the frame and bracket in place.
Do not adjust the setting screws for the direction the headlight
shines.


At night partk in front of a wall and shine your lights on the wall
so see if the headlight shifted during installation.

Jul 14, 2012 | Cars & Trucks

1 Answer

Replacing headlights I have a blown low beam


to replace the headlights themselves, no. under the hood, find the headlight. where it connects to the headlight lamp, it should simply twist off and pull out. Then you must unclip the clip holding the light on. It sounds sort of confusing, but it's really easy! Let me know if you need a bit more clarification.

Jan 10, 2011 | 2002 Hyundai XG350

1 Answer

Lo beam headlight replacement passenger side


open the bonnet, locate a screw on top of the headlight and undo it, locate two screws between the centre grill and headlight and undo them and locate a screw right behind the headlight assembly and loosen it. Now the whole headlight should come out. It wont come all the way out. By unplugging the electrical plug you can take it out completely. Lift up the lock thats hold the rear headlight cover and that will expose the internals of the headlight and then you can change whatever globe you want. First disconnect the wiring plug from the globe and then release the clip holding the globe and replace the globe and make you sure you dont touch the glass part of the new globe which installing. Touching it will shorten the globes life and there is a chance that it might explode inside and create mess. You need to buy H7 type globe for low beam.

Nov 10, 2010 | 2000 Mercury Cougar

1 Answer

Headlight replacement o5 trailblazern 200


Hi El, Since it's on the passenger side you'll need to remove the air filter housing & filter to get to the housing for the bulbs. Right behind that bulb housing there are two rubber coated caps (those caps are where the bulbs are located) that you'll need to remove. They can be tough to remove so it should be ok to use a flat head screwdriver to GENTLY pry the caps. Just make sure you are GENTLE with it and once it is loose use your hand to turn it counterclockwise about 1/4 turn. Gently pull it out then unplug the wire harness to it. **** IMPORTANT*** Like most headlight bulbs, DO NOT TOUCH THE NEW BULB WITH YOUR BARE HANDS. Halogens are ruined by our natural oils and it will make your new bulb burn out extra fast. Also: The outside bulb should be the LOW BEAM and the inside should be the HIGH BEAM. Let me know if you have any other questions and I'll be happy to help.

Apr 23, 2010 | 2005 Chevrolet TrailBlazer

1 Answer

I have to replace the ballast for the HID headlights on my 2004 XC70 volvo and it is under the headlight assembly. I just need assistance on how to remove the passenger side headlight assembly


You need to remove the front bumper. Five push clips along the hood line, remove the headlight wipers (if equipped), one T25 screw in the front of each fender well, then two 12mm bolts under the headlights (1 each side). Then there are 4 10mm bolts holding the headlight in.

Aug 13, 2009 | 2004 Volvo XC70

1 Answer

Need to replace a headlight assembly for a 2006 Subaru Outback.


No, you just remove the radiator grill and the side marker light and the headlight housing bolts and it comes out. Not a real hard job and is Real straight forward. Good luck and have a good day.

Mar 27, 2009 | 2006 Subaru Outback

1 Answer

How do I replace my 2003 Acura TL passenger headlight assembly?


You will have to remove the front bumper to get to the bolts that hold the head light on
I would not recommend you try this unless you have some experience with this type of work

Mar 13, 2009 | 2003 Acura 3.2TL

1 Answer

Need to replace passenger side headlight on a 2002 Honda civic lx


I have not done this yet but I have seen a DIY on hondacivicforums.com. From what i hear to remove the headlight assembly you have to remove the front bumper to get to screws that hold the headlight assembly on.

Hope it helps.

Dec 31, 2008 | 2003 Honda Civic

2 Answers

Need to put on a new horn


it is behind the passenger side headlight assembly. you will have to remove the headlight assembly to replace it. I hope this helps.

Dec 05, 2008 | 2002 Dodge Neon

Not finding what you are looking for?
1995 Oldsmobile Aurora Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...