Question about 1993 Ford Crown Victoria

3 Answers

Cracked Rim The passenger right tire and rim need to be replaced. The rim is cracked and tire is not good anymore. I would like to get the exact tire and rim detail information like size, model, etc. for a 1993 Ford Crown Victoria. Also where is best to go besides going through the dealership. Thanks in advance for your help!

Posted by on

3 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

You could try a salvage yard, or you might try this link, assuming the rim is aluminum http://cgi.ebay.com/ebaymotors/1992-1993-Ford-Crown-Victoria-15-OEM-Wheel-Rim-3125_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQitemZ300102722722QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
As far as the tire goes, you should be able to go to your local auto repair shop and purchase a comparable tire. If you're unsure, original equipment tire size was P215-70-15. I hope this helps

Posted on Nov 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

First look at the side of the tire and you can get all the info for a new tire, and as far as the rim goes check the yellow pages and see if you have any salvage yards near you and have them check for a rim in they're yards or most are tied together by a computer network and they may able help you find one and usually they can get it shipped into they're yard in a few days. this way you will bypass the dealer.

Posted on Nov 18, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 147 Answers

Salvage yard would be your best bet

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In the right rear I get a rubbing noise when making a left turn or during rapid acceleration.


If the tire started coming apart it could have hit the brake dust cover and bent it.

May 01, 2016 | 2002 Jaguar X-Type

1 Answer

Cracked rim


If you live in A Winter Salt Area, it is common or you may have hit a Pot hole too hard.... Either way, I have seen them repaired but I would not do that, You have a WEIGHT problem and Out of Balance situation.

Replace the Rim.. Go to www.car-part.com and you can find one locally and save yourself the hassle

Apr 09, 2013 | 2001 Ford Expedition

1 Answer

07 nissan sentra valve stem leaking


I'm assuming it is a TPMS sensor valve stem? I do not know o any reason the rim would break when replacing it, unless the rim was already cracked around the valve stem hole due to some kind o impact, in which case, the rim should be replaced anyway. As far as fixing it yourself. Unless you can break down the bead seat of the tire and unmount the tire from the rim, you will not be able to replace it yourself. Once the tire is of the rim, the sensor is held in place by a 11mm or a 12mm hex collar. When you remove this collar, the sensor will pull right out from the inside. ANY tire shop should be able to do this for you for very little charge.

Dec 12, 2012 | Cars & Trucks

1 Answer

What type of Rim can I buy for cheap for my Volvo?


try your nearest salvage yard or order online dont know where you are im in canada so cant tell you where to go for sure

Dec 11, 2012 | 1989 Volvo 760

1 Answer

I got a flat tire of my 1999 cherokee limited and it cracked the rim can i use the rim off of a chevy blazer fit on it. the tire number of the cherokee is p245/70


The lug pattern for a blazer is not the same even if tire is the same size. Afew wheel spaecialist can repair you wheel though

Jan 10, 2011 | 1999 Jeep Grand Cherokee

1 Answer

Got hit on the right rear tire and now it is dented in


find some junkyards in the phone book and call them until you find a replacement rim. they are about 20 bucks used and most likely about any GM rim from the 90s will fit it. have your old tire put on your new used rim, balanced, and you are good to go unless the tire itself has been damaged.take a look at the tire size so you know what size rim you have, most likely a 13,14, or 15 inch size.

Nov 10, 2010 | 1996 Chevrolet Cavalier

2 Answers

My 2001 grand cherokee rims are 17" what is the exact size, and what other rim would fit.


Hello, Thank you for trusting FixYa.com to help get you going! The rims on your Cherokee, (and any other vehicle) are measured based on the tire that is designed to fit it. Technically the rims is just shy of 17". They measurement is taken at the base of the lip at the tire seat, ( the place on the rim that the tire seals against.) There are many outlets with rims for sale from custom to OEM, available in almost every city in America. Depending on the look or function that you are seeking, prices range greatly. Good luck, and if you have additional information, questions, or comments please return, and I will respond quickly to your concerns. Thanks again for trusting FixYa.com, have a great day!.

Jul 20, 2010 | 2001 Jeep Grand Cherokee

2 Answers

I have an s-type jag 3litre sport reg 2001. i thought i had a puncture so i replaced the tyre, 2 weeks later flat again.the tyre guy said there could be a problem with the rim no getting a good seal i...


besides the rim problem, which he could have corrected by applying bead sealer, the stem could be defective or the rim could be cracked.

to fix a rim leak, clean the area on the tire where the tire meets the rim. make sure there are no nicks or tears along that area. clean the rim along the surface where the tiremeet the rim, no corrosion or debris. apply bead sealer to the cleaned area and mount the tire to the rim and inflate.

to check the tire for leaks, fill a spray bottle with water and add a short squirt of dishwashng liquid. over inflate the tire to about 45psi. remove the tire and lay it flat on the ground. saturate the area where the rim meets the tire. wait awhile to see if bubbles form. repeat for the other side. also spray the valve stem, tread and sidewall area. do this slowly while looking for bubbles, sraying liberally. you might need more soap in the solution depending on the concentration of the dishwashing liquid.

Mar 21, 2010 | 2001 Jaguar S-Type

Not finding what you are looking for?
1993 Ford Crown Victoria Logo

Related Topics:

175 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...