Convertion between square metre and square feet

One meter squared = 10.764 square feet

One square foot = 0.092902 square meters

Hope this helps! Have a nice day!

Posted on Nov 23, 2008

Square foot is a measure of area, cubic foot is a measure of volume. There is no direct conversion between them.

For example, if you have 2048 square feet with a one foot ceiling, you would have 2048 cubic feet. If the ceiling was raised to ten feet, you would have 20480 cubic feet.

For example, if you have 2048 square feet with a one foot ceiling, you would have 2048 cubic feet. If the ceiling was raised to ten feet, you would have 20480 cubic feet.

Nov 17, 2016 | Cars & Trucks

The conversion is from **inch pounds** to Newton Meters

The factor: 1 Lb-Ft = 1.35582 Nm.

The direct quote: boltscience.com

Torque is a measure of how much twisting is applied to a fastener. The units used to measure torque are in the form of force times length.

The metric (SI) unit of torque is the newton metre (Nm). In inch units, torque is usually measured as Lb-Ft (pounds feet) or Lb-In (pounds inch). The Torque Converter Calculator will allow you to convert Nm to Lb-Ft or Lb-In or vice-versa. The calculator uses the conversion 1 Lb-Ft = 1.35582 Nm.

HOPE THIS helped

Torque Units Conversion Online Units Converter

The factor: 1 Lb-Ft = 1.35582 Nm.

The direct quote: boltscience.com

Torque is a measure of how much twisting is applied to a fastener. The units used to measure torque are in the form of force times length.

The metric (SI) unit of torque is the newton metre (Nm). In inch units, torque is usually measured as Lb-Ft (pounds feet) or Lb-In (pounds inch). The Torque Converter Calculator will allow you to convert Nm to Lb-Ft or Lb-In or vice-versa. The calculator uses the conversion 1 Lb-Ft = 1.35582 Nm.

HOPE THIS helped

Torque Units Conversion Online Units Converter

Oct 25, 2016 | Cars & Trucks

If you just Google this converting tools are all over the page.

** 2500 square inches equal 72.338 square feet.**

Aug 18, 2016 | Cars & Trucks

That depends upon how thick the foam insulation is. That is the only way to compute from cubic feet to square feet.

To simplify, assume the foam is 1 foot wide by 1 foot thick by 51 feet long. That is 51 cubic feet of foam. If you slice the block lengthwise at 1 inch intervals, you get 12 slices, each 1 foot wide by 51 feet long by 1 inch thick. This is 51 square feet of coverage at 1 inch. You would be able to cover 51x12, or 612 square feet.

Increase the thickness of the slice to 1-1/2 inches, you only get 8 slices, or coverage for 408 square feet.

Any thicker than that, and you won't get enough coverage for 400 square feet.

To simplify, assume the foam is 1 foot wide by 1 foot thick by 51 feet long. That is 51 cubic feet of foam. If you slice the block lengthwise at 1 inch intervals, you get 12 slices, each 1 foot wide by 51 feet long by 1 inch thick. This is 51 square feet of coverage at 1 inch. You would be able to cover 51x12, or 612 square feet.

Increase the thickness of the slice to 1-1/2 inches, you only get 8 slices, or coverage for 408 square feet.

Any thicker than that, and you won't get enough coverage for 400 square feet.

Aug 05, 2016 | Cars & Trucks

the pep ure buying system of will do it all 4 u

Apr 13, 2015 | Cars & Trucks

One square yard is 0.83612736 square meters.

Sep 19, 2014 | Cars & Trucks

Linear feet are a measure of length (no different from feet); square feet measure area. You cannot simply convert between measures of different kinds of quantities;the connection between them will be specific to a particular problem.A practical example in which this question can arise is in buying countertops for a kitchen. Some materials are sold by the square foot; others (basically those that are extruded, so they come in standard widths) are sold by the linear foot. In order to compare the two, you need to compute the area and wall length for the countertop you want.You can't convert between the two. All you have to do is to make the appropriate measurements so you can calculate the price of each item.The terms used in the lumber industry are a bit confusing.There are two terms that I think you might be mixing up.A LINEAR FOOT is simply the length of a board. If you want to know the area or volume of the board,you need additional information. For instance, 6 linear feet of 1-by-12 has an area of 6 square feet (12 inches = 1 foot, times 6 feet), and it's 1 inch thick, so the volume is 1/2 cubic foot (6 square feet times 1/12 foot). But 6 linear feet of a 1-by-6 board would have half the area and half the volume.A BOARD FOOT is equivalent to one square foot of a 1-inch-thick board. In other words, it is a square-foot-inch (ft^2-in), or 1/12 cubic foot.Linear feet are used for the pricing of a single size such as two-by-fours. Board feet are used for larger lumber that you are more likely to want to compare directly with different size boards .To sum up, neither a linear foot nor a board foot can be converted directly to square feet. A linear foot is a linear (length) measure, and a board foot is a volume measure. You need to know your particular board to do anything more, such as find the area.an example with an" L" shaped countertop will betwo rectangles are 24 by 80 inches and 24 by 36 inches. Thus the area is: 24 * 80 + 24 * 36 = 24 * (80 + 36) = 24 * 116= 2784 sq. in.To get it in square feet, divide by 144:

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

2784 / 144 = 19.33 sq. ft.The linear measure of this countertop would be 60 + 80 = 140 inches = 140/12 feet = 11.67 feet

Apr 08, 2014 | Cars & Trucks

If the floor is 23 feet by 28 feet then the area is 644 square feet.

Mar 27, 2013 | Cars & Trucks

Hi, a cubic metre is a measure of volume, a square metre is a measure of area. you need to know length and width as well as depth. eg; imagine a cube is 1 metre wide by 1 metre deep by 1 metre high, this is 1 cubic metre, if you sliced this cube into 10cm slices it would cover 10m2. if you sliced it into 5cm slices it would cover 20m2. I hope this helps.

Mar 14, 2013 | Cars & Trucks

Need to know how much earth this machine can move in a given time first.

Mar 30, 2010 | 1988 Mitsubishi Cargo

Mar 25, 2015 | 1997 Buick LeSabre

321 people viewed this question

Usually answered in minutes!

×