Question about Hyundai Elantra

1 Answer

The fuse keeps blowing for the brake lights - Elantra Hyundai Cars & Trucks

Posted by on

  • cludedogeh69 Nov 20, 2008

    thanks mrgreenz i already replaced the brake light switch under the petal i will check wiring going to bulbs what are the chances i got a bad switch i got it from napa ? and if it was a bad switch would that make the fuse keep blowing ?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 962 Answers

Check the switch under the brake pedal and the wiring going to the bulbs.

Posted on Nov 18, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brake light fuse keeps blowing how to fix?


pull the rear bulbs out and try again, does it have a third brake light? does it work?

Dec 10, 2015 | 2006 Ford Territory 4.0

1 Answer

Fuse 129 keeps blowing x5


The warning light may not have been reset, door lock actuator bad creating a short - blowing fuse, or bad switch.

Dec 13, 2013 | BMW X5 Series Cars & Trucks

1 Answer

Brake light fuses keep blowing


On some models the light switch it defective increasing the volts in the tail and brake circuit.

Dec 02, 2013 | Mitsubishi Galant Cars & Trucks

1 Answer

Brack lights wont light up on my 1988 ford ranger we keep blowing fuse and put in new brake switch


If you keep blowing the brake fuse than you have a short in the system. Unplug the brake switch. Install a new fuse. If it did not blow than the problem is after the brake switch. Next unplug the turn signal switch, then plug the stop light switch back in and press the brake pedal. Did the fuse blow. If not than the wiring is good in between the two switches. With the turn signal switch disconnected use a jumper wire in between the light green wire (power from the brake switch) and the orange with light blue wire (power to the right brake lamp). If the fuse blows than there is a short in the right side brake circuit between the plug in and the rear socket assembly. If the fuse does not blow than jump from the light green wire to the Light green with orange wire (power to the left brake lamp). If the fuse blows than the problem is in the left hand brake wiring circuit.

Sep 04, 2013 | Cars & Trucks

1 Answer

1993 grand prix.blows brake light fuse when u apply brakes


hot wire touching metal fuse blows so you don't burn up the wiring get it tested and fixed soon could be dangerous to keep putting in a new fuse

Jun 24, 2013 | 1993 Pontiac Grand Prix

1 Answer

Why does my brake fuses keep blowing on my kia sportage 2001


you have faulty brake light switch or one of brake light bulb sockets or wiring have a short.

Jan 03, 2013 | 1996 Kia Sportage

1 Answer

How do I keep fuses for hazards and brake light from blowing


They use the same bulbs in the back.
Check the light sockets and wiring for shorts to ground.

Jun 30, 2012 | Ford E150 Cars & Trucks

1 Answer

Brake lights keep blowing fuse, Trunk indicator light won't go off with trunk closed


may have a short could be a bare wire recheck the brake switch make sure that the switch is not touching and metal.

____________________
BMW b800 srs airbag scan/reset tool

Jun 11, 2012 | 2001 Dodge Intrepid

1 Answer

1993 Ford Taurus brake light fuse keeps blowing


Look for a short on the LG/R wire coming out of the BOO (brake on/off) switch.

Jun 06, 2009 | 1997 Ford F150 Regular Cab

2 Answers

Break / hazard light fuses keep blowing


check both brake lights for moisture getting into them.

May 25, 2008 | 1999 Cadillac Escalade

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

238 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...