Question about 1998 Cadillac Seville

2 Answers

1998 cadillac seville sts

My air suspension pump keeps runing at all the times when the car is on and the car gets as high as it can get. my pump does not shut off. I have removed the fuse to kill the pump. help please?

Posted by on

  • Anonymous Mar 19, 2014

    when car switch is open or runnin engine the air compresser comes on and off without stopping making the air suspension pump get too hot

  • Anonymous Mar 23, 2014

    gas is not getting to motor

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 260 Answers

Maybe there is a leak in the system and the pump is constantly trying to compensate. if the vehicle sits for a day or so, will the suspension sag in a certain spot? maybe a leveling sensor. may have to be diagnosed with scan tool

Posted on Nov 18, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The problem is with your $85.00 leveling sensor-- its another $150.00 labor.

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 cadillac seville sts error code 1039


1039 = (4.6L engine) loss of road sensing data.

1039 = (4.9L) engine) SSS (speed sensitive suspension)signal loss.

The 1039 code requires extensive diagnostic testing.

Feb 06, 2012 | Cars & Trucks

1 Answer

Engine code TSC 1276 on a 1997 cadillac seville sts what does this code mean?


Using the Cadillac on-board diagnostic display you'll also see "IP" for the IPC instrument panel, "AC" for the air conditioning module, "TC" for traction control, "RS" for the road suspension system, "SD" for the air bags, "PZ" for the body control module, "CC" for the cell phone and "RF" for the integrated radio.

6e4377d.jpg

C1276 Delivered Torque Signal Circuit Malfunction

Check your Trasnmission for any wrong solenoids or Torque Converter.

Jun 04, 2010 | 1997 Cadillac Seville

1 Answer

Can I replace my F55 struts with Monroe Sensa trac


the system is integrated design and not a good idea to do this it may be possible but air system is designed to us magniride and will malfunction if changed

Oct 30, 2009 | 2003 Cadillac Seville

2 Answers

1998 cadillac seville sts air ride prob


Disconnect the - battery terminal for a minute and reconnect.
Good Luck

Jun 14, 2009 | 1998 Cadillac Seville

1 Answer

Adjusting my rear suspension


You can adjust the REAR air shock levels at the link by rear axle. Hope this helps

Apr 19, 2009 | 1998 Cadillac DeVille

1 Answer

1998 seville sts check suspension light stays on. New shocks on rear.


that system has a pump, you should hear it run when you start the car. it also has a bleed valve. i have seen the valve get stuck before. i don't remember what year caddillac stopped putting the suspension switch in the trunk, but if the switch has been turned off the light will remain on as well. there is a level sensor under the rear of the car connected to the suspension you can try to disconnect the arm and manually move it and see if the pump kicks on. there is a few second delay before you hear the pump. if the fuses are good and the switch is on check for voltage at the pump when you move the level sensor. check for signal from the sensor. if pump runs and shock don't air up check for air leaks with soap water spray, and/or air bypassing valve. hope i helped you...dustang

Mar 29, 2009 | 1998 Cadillac Seville

1 Answer

1998 cadillac seville STS


on my 1998 Deville its located in the trunk. the panel thats is butted up to the back of the rear seat. look for some black nuts around the top of rim of the trunk, they are about 1'' long, these have to be removed first... good luck.....

Mac.........

Mar 09, 2009 | 1998 Cadillac Seville

1 Answer

Replace power steering pump and lines 1992 cadillac seville sts


you need to have a pulley puller to get the pulley off if you don't have one most auto zone part stores have a loan a tool program and they can help you with that on most powersteering pumps the high pressure line will be a fitting or bolt on and the return line is usually just a squeeze clamp hope this helps good luck

Jan 30, 2009 | 1995 Cadillac DeVille

1 Answer

Overheating bigtime


Is the temp gauge high?Does the car blow white smoke?Check the oil and see if you have antifreeze/water in the oil.You may have a blown head gasket.Im assuming you have a norhtstar motor.

May 27, 2008 | 1998 Cadillac Seville

Not finding what you are looking for?
1998 Cadillac Seville Logo

Related Topics:

404 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

68032 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...