Transmission computer is receiving a sensor signal indicating that a wheel is losing traction also make sure all tires are same height and diameter ( worn and soft tires could cause weird feedback signals, also worn shocks and springs may allow the wheel(s) to bounce around a lot making it appear as though its got no traction
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Had the same problem. Easy fix. Grasp the plastic dashboard piece that goes around the instrument cluster and 4 wheel drive switch and pull off. Remove the 4 wheel drive switch. Unplug wiring harness from back of switch. use small screwdriver and carefully bend all metal tabs in back of switch slightly to one side. Re-install harness and switch back into dash. Should work fine, it just was not getting a connection. Worked great for me.
Your blazer is equipped with a shift on the fly four wheel drive. That means that at speeds less than fifteen miles per hour you can shift into or out of four wheel drive by simply pushing the four wheel high button. If you wish to shift into four wheel low. Stop, put the transmission into park or neutral, and push the four wheel low button. Same procedure for shifting back out. Never shift into or out of four wheel low while moving. And be careful in four wheel low. At full throttle your still barely moving, you don't want to blow your engine up!
go to auto zone and ask them to check it with OBD 1. also , be very careful about touching any electrical connections in and around airbags (serious injuries can occur). R U the original owner ?? mybe some else disconnected the wires or could be a chop shop special ( as well as other wiring issues) otherwise take it to chev. dealer.