Question about 2001 Pontiac Grand Am SE

2 Answers

Turn signals dont work

On a 2000 pontiac grand am gt hazard lights work but have no turn signals. turn signal switch feels like operating properly.

Posted by on

  • 4 more comments 
  • karafil362 Nov 23, 2008

    The Pontiac Dealer said it was the turn signal switch, parts and labor $450. Took my fist and banged on the dashboard by the hazard switch and now the signals work again. I knew not to trust the dealer!

  • karafil362 Nov 23, 2008

    The flasher is behind the hazard button which requires taking the dash apart but the old fist did the trick for now.

  • Anonymous Mar 18, 2014

    I'm trying to figure out why my signals don't work? I even tried the flashers and they don't work please help

  • Anonymous Mar 19, 2014

    How do I get to the flasher switch

  • Anonymous Mar 21, 2014

    have replaced hazard switch in 2000 grand am but it still sounds like turn signals are on...can you by-pass or connect some wires to bypass this clicking in switch

  • Anonymous Mar 22, 2014

    turn signals and hazards and break lights dont work. fuses are good ,head and running lights are workig



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Had the same problem the hazard and signals are run by the same switch in the dash 15 min job switch costs $65.00.

Posted on Dec 03, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 275 Answers

Check the flasher and the fuse

Posted on Nov 19, 2008

  • Walter Morris Nov 24, 2008

    never trust the dealer always get a second opinion first it is probably the flasher when it quits you will have to replace it but the dash cover should have clips and screws its not hard to take it apart



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Turn signals don't Flash signal, the fuse is fine and all four lights light up. Also the Hazard light switch will not depress which could be the whole problem. What think? 2000 Pontiac Grand Prix GTP

This vintage era GM vehicle is known for turn signal issues due to bad hazard switches. Replace the hazard switch and everything should return to normal

Sep 04, 2017 | Pontiac Cars & Trucks

1 Answer

1999 pontiac grand am blikers dont work all the time

This is a problem with the hazard switch. It is the hazard and turn signal switch flasher module. These are high priced. I would try a junk/salvage yard first. They cost about $80.00 around here for new.

Sep 29, 2011 | 1999 Pontiac Grand Am GT

2 Answers

I have a 1995 grand prix Blinkers dont work but, other lights do.

First check turn signal fuse and relay if, they are good then try pressing on and off the hazard switch while turning the signal switch on.If signals start to work replace hazard switch.If hazard switch is good then replace turn signal switch.

May 02, 2011 | 1995 Pontiac Grand Prix

1 Answer

I also have a 2000 gt. it has that same signal issue. however the dealer had said the recall was done on the car. how do i knoow if the signal switch is bad??

usually if you tap on the hazard switch or bang on the dash and they act up its the hazard, I have found if u tap on the end of the turn signal switch and it acts up its the switch in the column

Dec 01, 2010 | 2000 Pontiac Grand Am GT

1 Answer

Where is the turn signal relay located in my 1999 pontiac grand am,,,,i already checked the fuses and the hazards work but no turn signals at all

the hazard button is the relay for both the turn signals and the hazards. you have to remove the trim panel that the hazard switch and radio are in pull it out of the back of that panel

Dec 28, 2009 | 1999 Pontiac Grand Am GT

1 Answer

Where is my turn signal switch or the flasher on

The turn signal switch is in the column, at the end of the turn signal lever. The flasher is integrated with the Hazard switch. The hazard/turn signal flasher is common to go bad.

Oct 28, 2009 | 2000 Pontiac Grand Am GT

3 Answers

Turn signals wont work fuses are good?

the hazard switch above the radio is your problem. if you put on your signals and they don't flash turn hazards on then off and they will flash. (changing this *** will fix your problem

Aug 30, 2009 | 1999 Pontiac Grand Am GT

3 Answers

No break lights or hazard lights or no turn signals

first check all fuses then under hood check all fusible links

Aug 12, 2009 | 2000 Pontiac Grand Am GT

3 Answers

Intermittant turn signal failure

THIS PROBLEM IS CAUSED BY THE FLASHER MODULE it is part of the Hazard switch. You have to replace the entire switch

Aug 06, 2009 | 2000 Pontiac Grand Am GT

Not finding what you are looking for?
2001 Pontiac Grand Am SE Logo

499 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides