Question about 1995 Chrysler Cirrus

1 Answer

Chrysler cirrus 2.5 v 6 no fire

Justs winds over no spark,checked a plug no go, also checked fuses

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

I've heard it's an issue with the distributor. Moisture, washing your engine gets through the vents in the distributor causing no spark. The ignition coil/module is built into the distributor housing. This means the distributor would have to be replaced. People also have tried using WD-40, I don't recommend, due to it only being a temporary fix and the petroleum in the WD allows build up to occur. BAD distributor design!!!!

Posted on Jun 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 chrysler cirrus turns over gets gas but no fire to plugs


Which engine, and what have you checked so far ?

Feb 11, 2013 | 2000 Chrysler Cirrus

1 Answer

1995 cirrus car will not start will turn over has fuel to the rail has fire to the plugs it just died on us with no indication stuck in Georgia with wife and two kids need help asap any help would be...


Check for a fuse for the injectors. Pull a sparkplug or two after cranking the car over and see if they are wet with gas, as they should be. When you checked for spark, did you see a good blue spark? An orange or weak spark could indicate an ignition problem. Other than that, I don't know-may have to have a shop diagnose it.

Jul 08, 2012 | Chrysler Cirrus Cars & Trucks

1 Answer

Don't know which order spark plug wires go in to the distributor


V6? the cap should be marked. front cylinders are 2 4 6 rears are 1 3 5. the firing order is 1 2 3 4 5 6.

Sep 08, 2011 | 2000 Chrysler Cirrus

1 Answer

My 1998 Chrysler Cirrus LXi 2.5L 'Suddenly stopped', (Despite second fuel-pump, distrib, cam and crank-sensors (All 'under-hood' new fuses, (Incl. 'ASD relay/s ), Still, 'Won't deliver any 'spark', RUDE!...


ok we changed the crank sincere and still don't have any spark to my plug's and everyone is telling me different things checked the fuses and the fuel pump is working . it is a 1995 Chrysler cirrus lx 2.5 V6 please help

Apr 28, 2011 | 1998 Chrysler Cirrus

2 Answers

My car started fine yesterday...today..its just turning over..like its not getting any fire..any suggestions


you need to determine if you have spark at plugs while turning the engine over,or if you don't have enough fuel pressure to fire it up,you will need at least 55psi of fuel pressure at the fuel rail to start

Jan 12, 2010 | 1996 Chrysler Cirrus

1 Answer

1999 chrysler cirrus


Check the coil packs, or the Ignition module. Disconnect the harness to the ignition module. And test the leads to see if there is current. I don't know what the specs should be, but it will be minimal. Never overlook fuses either.

Jul 04, 2008 | 1999 Chrysler Cirrus

Not finding what you are looking for?
1995 Chrysler Cirrus Logo

Related Topics:

444 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...