Question about 2004 GMC Canyon

1 Answer

Thank you thanks for the reply but I really don't think that would work locking and unlocking the doors 3 times real slow b/c there is no power to the doors, everything is manuel, Crank windows and no power door locks, But I'll give it a shot anyway the next time that happens, Couldn't hurt to try

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GMC Master
  • 21,949 Answers

Well honest it works with a lot of europeon cars ,especially the scourge of my life --RENAULT-- only have to look at these cars the wrong way and the immobiliser cuts in and its about 220 euros for the dealer to release them.if no power door locks then it will not work.Their must a be a mobile mechanic locally who could look at motor for you without paying dealer prices and becoming a golden egg layer.bit far for a call out for me ,iam in alicante spain ,sun sea beach and sangria ???only wish it was .

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SUZUKI FORENZA DOOR LOCK PROBLEM


i think that is to prevent you from being locked out,

Mar 16, 2014 | 2007 Suzuki Forenza Sedan

1 Answer

2005 Saturn Relay power doors don't work rear hatch locked shut...help


its alot going on if all that started happening at one time check the bcm. body control module.

Dec 02, 2012 | 2005 Saturn Relay

2 Answers

Power window switchs on 1996 gmc jimmy


Inspect or replace the window lock and unlock switch on the drivers door power window switch. There is a lock and unlock switch that will disable the switches to the other power window in the Jimmy. Check to make sure that switch is in the unlock position to have the other power window switch to work.
Thank you for suing fixya and good luck.

Apr 19, 2010 | 1996 GMC Jimmy

1 Answer

A friend of mine has a Lexus 1997 ES and his remote control needs reprogramming. How do I do it for him. Thank you so much.


1. Driver's doo opend and unlocked, all other doors closed and locked
2. Inser Your key in ignition, don not turn, remove key
3. using the manual lock/unlock button on ther dirvers door, slowly press lock and unlock 5 times (count the lock 5 times and unlock 5 times)
4. Shut door
5 Open door
6. Using the lock/unlock button on the direvers door, slowly press and unlock 5 times (count the lock 5 times and the unlock 5 times)
7. With the door open insert you key into the ignition, turn to ON position (don't start), wait 5 seconds. Trun off and remove key.
8. Locks should cycle once (Car will lock and unlock once). If they don't cycle or they cycle more that once, do stips 1-7 over.
9. Using the remote, push lock button, hold for 1 second, release. The locks should cycle once. If not start over and go slower.
10 Close the door. Open the door. Press the lock button on the remote. The locks should cycle. Close the door. Press the lock button on the remote, the doors should lock. Press again and the doors shoud unlock.

I got this from a site called FixYa (don't have URL). It took me a few tries but it worked like a charm.

Sep 24, 2009 | 1997 Lexus ES 300

1 Answer

My driver side door will unlock but won't open.


This sounds like the LAtch is STICKING and needs to be Replaced or Lubed up Real Good. But Also the Lock Cylinder Needs Lubercated, I Recomend PB Blaster< Its a PENETRATING OIL that Does the JOB GOOD. You Must FIRST get the Door Back OPEN to Srpay the LATCH down.You can Play with it till it Opens Or have A $40.00 an hour Lock-Smith Do it for you. I Know this may not seem like Much HELP But if you can Get the Door open the Rest is a Breeze. To REPLACE Latch>>.Remove Door Pannel, There ARE HIDDEN Screws From the Handle UP But the Lower part of Pannel is SNAPED on. There are Links to & From Latchto Remove, 1 From Inside Handle, 1 From Outside Handle, 1 From Inside LOCK, 1 From Outside LOCK, And For POWER LOCKS, there Is 1 from the Power Lock Solinoid. TAKE A Super lose Up PICTURE of it if Possible, For Memory of Where they Go. The Lock has 3 - 4 Screws IN DOOR JAM SIDE that Holds it in Remove them and Latch Comes Out. REVERSE to INSTALL. Hope this Helps you!

Jul 23, 2009 | Hyundai Motor 1998 Sonata

1 Answer

I got chicken gremilns playing with the power locks


Vacuum fluctuation, real slow vacuum leak in lock control system

May 21, 2009 | 1998 GMC Jimmy

2 Answers

2000 Toyota Sienna Minivan car alarm goes off.


1. Start with key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.

2. Insert key into ignition (Do not turn) and pull it out.
3. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Close, then open drivers door.

4. Perform these steps within 40 seconds.
A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting
with lock. Use an even pace and try to go about one cycle per second.
(1 cycle = 1 lock and 1 unlock.)
B. Insert the key in the ignition cylinder.
C. Turn the ignition to ON (Do NOT Start) then back to OFF.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.

5. Within 3 seconds the power door locks should cycle automatically indicating successful entry
into programming mode. Return to step 1 if the locks do not cycle at this point.

6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks
should cycle once indicating successful programming. If the door locks don't cycle or
cycle twice, repeat steps A and B, your remote has not been accepted.
C. Repeat steps A and B in step 6 for each new transmitter.

7. Close drivers door.

Apr 25, 2009 | Chevrolet Malibu Cars & Trucks

1 Answer

2001 Ford Taurus auto locking door lock programming


CLICK HERE for the owners manual you require.

The instructions can be found on page 78.

There are 2 methods to enable/disable this feature. One through your
dealer and the second with a door lock sequence using the following
instructions:
1. Turn the ignition key to RUN, then press the door UNLOCK control
button 3 times.
2. Turn the ignition key to OFF, then press the door UNLOCK control
button 3 times.
3. Turn the ignition key to RUN, within five seconds press the door
UNLOCK control button 1 time.
The user should receive a horn chirp to indicate the system has been
altered.
Pressing the power door UNLOCK control button again will toggle the
Autolock/Relock states.
² Turn ignition to OFF to exit.


Thank you for using FixYa - A FixYa rating is appreciated!!

Jan 28, 2009 | 2001 Ford Taurus

1 Answer

Pass door lock


Pull the door panel and verify that the link rod for the door lock is connected to the door lock/unlock actuator, if it is cycle the locks, if nothing happens replace the lock actuator.

Aug 02, 2008 | 2003 BMW 5 Series

2 Answers

Keyless entry remote


Try this, it works on several 2002 models:


Step 1: Open drivers door and leave open.

Step 2: Lock and unlock the drivers door using the power door lock switch on the door.

Step 3: Insert key into the ignition.

Step 4: Turn key to on position and return to off position. (IMPORTANT - use ON position NOT ACC position). Do this 3 times within 10 seconds. Leave key in the ignition.

Step 5: Open and close the drivers door 3 times. (Door should be left open after this step).

Step 6: ECU should respond by locking and unlocking the doors.

Step 7: Press any button on remote #1. ECU responds by locking and unlocking the car doors.

Step 8: Press any button on remote #2 (etc.) Each time the ECU will respond by locking & unlocking the doors.

Step 9: Remove the key from the ignition and the ECU will respond a final time with a series of door locks and unlocks.

Jun 20, 2008 | 2002 Mazda Protege

Not finding what you are looking for?
2004 GMC Canyon Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...