It wont switch over when I turn the knob to put it towards my feet or even windshield defrost it doesn't come out from there....only straight at my face. The knob turns but the air only comes out the one way.
TSB 03-01-38-005d, is to replace the foam in the mode door valve.
foam comes loose and prevent the mode door from moving.
The whole dash must be removed to installed the new foam.
Part number gm
89018656
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Did something fall down in one of the vents? Sounds like a blend door is not able to fully move for some reason. If it's still under warranty take it to the dealer.
your blend door motor IS your defroster problem , as it is needed to direct heat mixed with the ac to properly defrost the windshield . if when you change your blend door motor and the problem still exsist , then youy have a defective blend door package , meaning one of the doors are faulty , which could get very expensive to repair , good luck !!!
how do i fix my ac/ heater they both wont work not even defrost it use to work only on selection number 5 now it dont work at all we just put a new blower in it today and it still wont come on
you may have abad slector door acuator.which is alittle motor bolted on the heater box.It move a door in box to direct air flow to right location.hope this helps.
YOU SEEM TO HAVE A LOOSE OR BAD AC COMPRESSOR DRIVE BELT. WHEN YOU SWITCH THE TO THE VENTS CLOSE TO THE WINDSHIELD IT TURN THE AC COMPRESSOR CLUTCH ON, IT ACTIVATES THE DEFROST. TRY POURING SOME WATER ON THE AC BELT AND SEE IF NOISE GOES AWAY. THE BELT MAY NEED ADJUSTMENT OR MAY NEED TO BE REPLACED. GOOD LUCK
×