My car would just not start some days so a person told me it was the ignition so i changed out my steering column and ot it starts but stalls imediatly.
SOURCE: installing ignition switch for 87 chevy s10 Blazer 2.8L 4X4
you need to replace the electrical part of switch?If os it is down on column under dash will be two bolts holding on with the dimmer switch also
SOURCE: 94 cavalier cranks, ignites, then stalls
Most scanners will only give you a code for 1995 and up. But it seems that it could be a Crankshaft Position Sensor.Try disconnecting the negative battery cable and let it sit for a few minutes. then reconnecting it back. if not you can go to Autozone and they will scan your car with a very expensive scanner and give you a code. they usually do it for free. I think it's either the CPS or some other densor such as the MAP, MAF . You can only know if the engine is scanned.
SOURCE: 1995 chevy cavalier intermittently stalling while driving
it is most likely **** in your gas tank the **** gets stuck in the fuel pump and then it wont send fuel let me know what you think
334 views
Usually answered in minutes!
×