Question about 1995 Chevrolet K2500
Left sRandyide of injector pump. You will need to remove the intake to change it. But the best thing to do is leave it there unplug the wires, not an easy job but it can be done without removing the intake buy a new PMD and the remote wire harness and locate the PMD out side of the engine compartment. Most people put it behind the bumper.
Posted on Jul 22, 2012
Make sure you take the "fancy cover" off of the top of the engine. I believe it is held on with 4 screws. The pmd is the black box about the size of a deck of playing cards that is located on the side of the Hight Pressure Fuel Injection Pump.
Posted on Feb 08, 2009
The stock location of the pmd is on the side of the injector pump. if you stand at the front the vehicle look and the middle front top section of the motor right where the drivers side of the intake manifold starts to rise you will see it
Posted on Nov 18, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jul 31, 2014 | 2005 Chevrolet Silverado 2500HD 2WD
Mar 19, 2011 | Chevrolet 3500 Cars & Trucks
Mar 05, 2011 | 1994 Chevrolet Silverado 2500
May 19, 2010 | 1995 Chevrolet Silverado 2500
Mar 14, 2010 | 1999 Chevrolet Silverado 1500
Feb 06, 2010 | 1994 Chevrolet K1500
Jul 27, 2009 | 1994 Chevrolet C/K 3500
Aug 01, 2008 | 1999 Chevrolet C/K 2500
Jul 24, 2008 | 1995 Chevrolet K2500
May 09, 2017 | 1995 Chevrolet K2500
275 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: