Question about 2002 Jeep Liberty

1 Answer

Jeep Liberty 2008--Noisy when releasing the gas pedal

I've had my Liberty for about 2 weeks. When I release the gas pedal I hear a sound (harmonic). It usually starts when I'm going around 55-60 mph, but it's also done it when I'm going 5 mph. I've never been in a vehicle that sounds like this, so I'm not sure if this is normal for the Liberty or if it's something that needs to be fixed.  

Posted by on

  • charles lamb Feb 26, 2009

    I have an 08 jeep wrangler unlimited sahara is making this annoying harmonic ratling sound when I take off slow and when I accelerate and reach the high rpm's, all this specially when cold.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

I might take a closer look at the wheel bearings. Being an '08model, I'd think that something like that would be covered by a warranty. May also have to do with the tires. I've personally driven a few Libertys at work, and haven't noticed anything like that, nor have any customers presented that as a problem. I hope this helps.

Posted on Dec 10, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ignition key won't release even though shifter is in park position


2008: Problem removing key from ignition [Archive] - Dodge Charger ...

www.chargerforums.com > ... > Charger Problems/Assistance

Jul 18, 2008 - 16 posts - ‎9 authors
[Archive] 2008: Problem removing key from ignition Charger Problems/Assistance. ...It seems the key won't rotate all the way to its normal release point, which is ... Model LX - 300 ' LX - Magnum ' WK - Grand Cherokee ' LX ...

Ignition key won't release - Chrysler 300C Forum: 300C & SRT8 Forums

www.300cforums.com/forums/.../98878-ignition-key-wont-release.html
Jun 2, 2012 - Ignition key won't release ... 2008 Jeep Grand Cherokee 3ltr crd Overland. Boro al is ... If it's too short/long the ignition key is not released.

Key won't come out of ignition . . . - JK-Forum


Jan 05, 2016 | 2008 Jeep Grand Cherokee

1 Answer

How to relearn throttle body on a Lexus is250


Pedal Relearn Procedure
Accerlerator Pedal Released Postion Learning is and operation to learnicon1.png the full released postions of the accerlerator pedal by monitoring the accelerator pedal sensor output signal. It must be performed each time harness connector of accelearator pedal postion sensor or ECM is disconnected.

1. Make Sure the acceleartor Pedal is fully released
2. Turn Ignition switchON and wait at least 2 Seconds.
3. Turn ignition switchOFF and wait at least 10 Seconds
4. Turn Ignition switchON and wait at least 2 seconds.
5. Turn Ignition switchoff and wait at least 10 seconds

Throttle Valve Relearn
Throttle ValveClosed Postion Learningicon1.png is to learn the fully closed postion of the throttle valveby monitoring the throttle position sensor output signal. It must be performed each time harness of
electric throttle control actuator or ECM is disconnect.

1.Make sure accelerator pedal is fully released.
2. Turn ignition ON
3. Turn igntion switch OFF and wait at least 10 seconds. Make sure that the throttle valvemoves during the 10 seconds by confrming the operating sound.
(You can hear the TB sound when you have key on and shifter in first gear and step on the gas. So you know what you listening for.)


Idle Air Volume Relearn Procedure
The Following Condtions Must be met in order for procedure to Work.

Battery Voltage :More than 12.9 volts at idle
Engine Coolant Temp 158-203 degrees Farenhiet
Electric Load Switch OFF i.e Air Condition, headlamps , rear defogger
Steering Wheel: Neutral Postion (Straight Ahead)
PNP Switch: OFF (Park Neutral Switch i.e. Clutch Switch...pretty sure)


1. Perform ACCERLEARATOR PEDAL RELEASED POSTIONS LEARNING
2. Perform THROTTLE VALVECLOSED POSITION LEARNING
3. Start engine and warm it up to operation temperature
4. Turn igniton switch OFF and wait at least 10 seconds
5. Confirm Gas Pedalif fully realeased, then turn igniton switch ON and wait 3 seconds
6. Fully step on and release gas pedal5 time within 5 seconds
8. Wait 7 seconds and fully step on gas and stay on until MIL stops blinking and is steady.
9. Fully release the Gas pedalwithin 3 seconds after the MIL has turned ON steady.
10. Start engine imediatly and let idle. Wait 20 seconds.

Sep 22, 2014 | Lexus IS 250 Cars & Trucks

2 Answers

My 2005 jeep liberty is stuck in park


This is not intended to sound rude, but have tried depressing the brake as you attemp to shift? I am the guy that all my friends call for advice and believe me this would not be the first or the last time for this question in my lifetime.

Mar 16, 2013 | 2005 Jeep Liberty

1 Answer

Throttle cable is extremely loose


There may be a plastic sleeve at the end of the cable that is locked in place. If so, you should be able to release the sleeve and move it.

Aug 19, 2012 | 2003 Jeep Liberty

1 Answer

Jeep Liberty 2004 sport gas cap not sealing


You can get the silicone grease at automotive and hardware stores. Apply to rubber seal on cap about every 2 to 3 months. This will ensure a seal so that the engine light doesn't come on. Worked great on My 2008 Liberty.

May 30, 2012 | 2004 Jeep Liberty

1 Answer

I want to reset the oil light on my 2008 jeep liberty !


owners manual - page 226 - Turn the ingnition switch to ON (do not start) and fully depress the accelerator pedal slowly 3 times within 10 seconds and then turn the ignition switch to OFF . **

Sep 20, 2010 | 2008 Jeep Liberty

1 Answer

'08 Liberty Limited - Radio won't hold presets


THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-006-08, DATED
FEBRUARY 22, 2008, WHICH SHOULD BE REMOVED FROM YOUR FILES. ALL
REVISIONS ARE HIGHLIGHTED WITH **ASTERISKS** AND INCLUDE AN UPDATED
OVERVIEW, REPAIR PROCEDURE AND LABOR TIME.
THE StarSCAN® FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM
THE INTERNET.
StarSCAN® SOFTWARE LEVEL MUST BE AT RELEASE 8.05 OR HIGHER FOR THIS
BULLETIN.
StarMOBILE STANDALONE MODE OR StarMOBILE DESKTOP CLIENT MAY ALSO
BE USED TO PERFORM THIS PROCEDURE.
SUBJECT:
Flash: Driver/Memory Seat or Driver Power Seat Functions Intermittently
OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Memory Seat Module
(MSMD) **and performing calibration on the MSMD with the STARScan.**
MODELS:
2008 (KK) Liberty
2008 (RT) Caravan/Town & Country
NOTE: This bulletin applies to RT vehicles with sales code JT2 and KK vehicles with
sales code LEW built prior to September 21, 2007 (0921XXMDH).
SYMPTOM/CONDITION:
The driver/memory seat and or driver power seat functions can become intermittently
inoperative due to a Memory Seat Module software issue. A software design change has
been made to eliminated these intermittent conditions.

Jul 17, 2009 | 2008 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...