Question about 1995 Jeep Grand Cherokee

1 Answer

Hurt front end

I bout a 95 Grand Cherokee 5.2 4x4 orvis edition.... i didnt notice that it had a different size spare that i had to put on one day in a hurry and i drove for a few hundred miles.... now (after i put a regular size tire back on) i have a horrible knocking noise in the front of my jeep and a horrible wobble in my steering wheel...... if N E 1 can tell me what i might have broke in ther i would appreciate it.....

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 260 Answers

Not trying to be rude but do be sure the wheel is tight. a build up of corrosion on the wheel or hub could cause the wheel not to set n lug studs correctly. that would cause a knock noise and will shake the wheel

Posted on Nov 17, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 grand Cherokee orvis I I blew the front cvjoint drive shaft apart how does the top head go together ? Bearings the slotted crown . How does it stay together I have it apartt along with new...


the part that the bearings run in is possibly that worn it will not hold together. I have repaired CV Joints before and you usually replace the whole knuckle at the end of the shaft or exchange the shaft for a reconditioned one.

Jul 23, 2014 | 1995 Jeep Grand Cherokee

1 Answer

What is the belt routing on a 1995 Jeep Grand Cherokee Orvis Edition with a 5.2 litre with A/C


This should do it. Let me know if it doesn't look right.
Its from the Gates Belt book.


s7020.jpg

Sep 05, 2012 | 1995 Jeep Grand Cherokee

1 Answer

Cant get the jeep to fire


Unplug the injectors, and shoot starting fluid in it to see if that helps any. Pull the plugs to see if they are gas fowled if this doesn't start it up briefly.

Mar 30, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Broken front coil spring


There were a lot of differences between a 98 TJ (Wrangler) and a 95 ZJ (Grand Cherokee). The grand cherokee is much heavier. Now might be the time for those "Off Road" upgrades you've been waiting on. And it is a good excuse.
Have a nice day!

Mar 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

RELACING WHEEL BEARINGS IN A 95 JEEP GRAND


Front wheel bearings can be done at home rear wheel bearings will require a hydraulic press and an axle puller. Either job can be difficult depending on amount of rust and availability of tools. The front wheel bearings are an assembly and once the jeep is up on jack stands, with the tires, brake calipers, and rotors removed, it is only a matter of removing the axle nut and 3 bolts (which can be difficult depending on rust) holding in the old bearing assembly

Feb 22, 2009 | 1995 Jeep Grand Cherokee

1 Answer

95 jeep grand cherokee dies at red lights and when you take off


First, check to see if any vacuum hoses have split or fallen off. Next, check codes.(if an 02 sensor code comes up, ignore it at this point) I would also remove and clean idle air control valve (close to throttle position sensor on throttle body) When cleaning, clean out the port in the body and spray off valve end but do not turn it. I don't remember seeing an egr valve on any of these engines but if you have one, remove and clean it as well. You have a good clean fuel filter in there and cap, wires and rotor are in good shape, right?? This is not a specific cure, but will get you moving in the right direction!
good luck

Feb 12, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1995 Jeep Grand Cherokee Logo

223 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...