Question about 1996 Suzuki Swift

1 Answer

Replacing right front wheel bearings 2003 Suzuki Aero SX

My son needs to replace the right front wheel bearings...

Do we need any special tools ...like a drill press ? Can we rent a drill press if we need one ?

Thanks in advance !
Sailcat

Posted by on

  • Anonymous Mar 18, 2014

    How to do it? Do I need special tools?

  • Anonymous Mar 26, 2014

    wheel bearing needs to be replaced

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 109 Answers

You can probably rent or borrow a bearing puller from a large parts store.

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Changing TENSIONER PULLY on 2003 SUZUKI AERO. SX?


Here's a link on removing the belt,then remove both screw holding the tensioner on. GET 35 GIFT CARD FOR EVERY 100 SPENT ON ONLINE SHIP TO HOME ORDERS Here's the tensioner... http://www.autozone.com/external-engine/belt-tensioner/duralast-belt-tensioner/suzuki/aerio/2003/4-cylinders-4-2-0l-sfi-dohc/44797_297531_0 It take's two people to remove and install the belt,one removes tension,the other removes the belt.It's possible you may have to get under the front end to take tension off of belt with the tool.

Aug 14, 2015 | Suzuki Cars & Trucks

1 Answer

Front wheel bearing on suzuki 03 xl7 4x4


old post.
and axles , really?
RTM

https://suzukipitstopplus.com/Products/1064-2005-forenza-reno-service-manual.aspx

$4 bucks to read the manual.
such a deal .

here is the GV , page. its same really
http://www.fixkick.com/hubs/vitara/new-vit-hubs.pdf

2001 + have the newer bearing hubs, unitized.
http://www.fixkick.com/hubs/no-crush.JPG


removing is easy, putting back right far harder.

see end hub #4
pull that with slide hammer, after removing screws #6
remove 7,8,9 and then using special tool pull ring 11.
with slide hammer pull, bearing hub.#1

RTM read the manual , at pitstop above
or the factory service manual , FSM
or at alldata.com,

Dec 31, 2013 | 2003 Suzuki XL-7

1 Answer

How to replace a rear wheel bearing on suzuki xl-7


is there any special tools you need to change the rear wheel bearing

May 08, 2012 | 2004 Suzuki Vitara

1 Answer

1992 4x4 front wheel bearing adjustment


To follow the "specs" you need a special socket with four pins (google should find a picture) to torque the bearing nut. These are crush bearings and are designed to be tighter than the older style bearings.
The bearing nut is under the locking hub, behind the locking washer that is fastened down with four screws.

Mar 27, 2012 | Suzuki Vitara Cars & Trucks

1 Answer

Repair front wheel bearing assembly


no special tools in particular just the usual or necessary tools required.. 1stly u remove the Tyre and the caliper then u'll see something like a long rod dats the bearing

Aug 02, 2010 | 2004 Mercury Mountaineer

1 Answer

Replace front hub assembly.


Replacing the front wheel bearing/hubs can be a big job for the inexperianced. Briefly...
Remove tire/wheel
Remove brake caliper assembly, do not remove brake line.
Remove caliper bracket.
Remove brake rotor.
Unplug ABS sensor.
Remove the large axle nut.
Press axle out of bearing (may need special tool)
Remove the 3 bearing bolts and remove bearing.

May 19, 2010 | 2003 Chevrolet Impala

1 Answer

Replacing the right wheel bearing how do u remove that hub do u need a special tool for it


is it a 4x4? the wheel bearing comes with a new hub assembley . Just find out what size the front half shaft nut/ lock nut/axle nut- is. its probably a 33mm thats the only special tool you will need. Unscrew it, take your outer tie rod off the spindle/steering knuckle, theres 3 bolts behind it, take them off then disconect the abs harness and pry out the old hub assembley use a rubber hammer (dead blow hammer) to tap the half shaft out if seized. when installing the new wheel bearing see your manufacturer specs. for torquing the axle nut back on.

Feb 16, 2010 | 2001 GMC Jimmy

1 Answer

What does it take to replace the front wheel bearings on a 2003 Tiburon


the front wheel bearings on your car are not sold except as a front wheel hub assembly with the bearing pre-installed, they run about $100.00 each, to replace them requires no special tools, all u do is remove the wheel, the brake caliper and the brake rotor and the hub nut, then the hub just slides off, u will most likely need a very large socket for the hub retaining nut.

Jul 05, 2009 | 2003 Hyundai Tiburon

1 Answer

I have a 2004 Suzuki Aerio SX and I'm faced with my third wheel bearing replacement this year. Has this been an issue for this make?


I saw on the MSN Autos site that 2003 Suzuki Aerios had front suspension issues, which I feel applies to the 2004 models.

Dec 07, 2008 | 2004 Suzuki Aerio

3 Answers

Replacing front wheel bearing


those are sealed units and are intergrated with the wheel rotor if the bearings are bad they must be replaced and those are dealer only items. labor for each side is about 1 hour for remove and install per side. unfortunately there are no aftermarket parts available just yet. hope this helps

Aug 28, 2008 | 2003 Mitsubishi Lancer

Not finding what you are looking for?
1996 Suzuki Swift Logo

411 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...