Question about 2005 Nissan Sentra

1 Answer

Brake Light Switch

I need to replace the brake light switch on my 2005 Nissan Sentra. I would like to do this myself, problem is I don't know where it is located. If someone could just tell me where it is, I could probably replace it!

Thank you.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

The switch is located on the brake pedal.

Posted on Nov 17, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tail light fuse keeps blowing


1st check your brake switch

Nov 27, 2013 | 2005 Nissan Sentra 1.8

1 Answer

Brake lights don't work


Have you checked the continuity of the wiring or test if there is any power getting to the switch with a test light

Aug 12, 2012 | 2005 Nissan Altima

1 Answer

Brake Lights Don't Work


You most likely have a defective/dirty brake light switch. Have a mechanic check the switch.

Apr 29, 2012 | 2005 Nissan Sentra 1.8

3 Answers

Need Fuse Diagrams, Brake light stays on


they are printed inside fuse panels and check brake light switch follow brake pedal under dash

Oct 25, 2009 | 1994 Nissan Sentra 4-Door

2 Answers

My brake light in my 2001 Sentra SE came on. Any


either the park brake switch is stuck open or the master cylinder is low on brake fluid.

Jul 10, 2009 | 2000 Nissan Sentra

4 Answers

Brake light does not turn off


This could be the problem http://z31.com/repairs/brakepedal/ different car same problem i just fixed my sentra based on that link.

Here is where to order the parts to fix it yourself.

http://www.courtesyparts.com/betasite/stopper-rubber-p-365646.html



May 28, 2009 | 1997 Nissan Sentra

2 Answers

2003 Nissan Sentra Brake lights stay on


When you depress the brake pedal, the brake pedal will move away from the brake light switch and cause a close circuit and the brake lamps light up. There is a rubber bunk on the pedal which pushes against the brake light switch to shut it off when you release the brake pedal. Most likely this rubber bunk has either fallen off or disintegrated leaving a hole in the brake pedal so there is nothing to push against the switch to shut it off. Look up the brake pedal until you see the brake light switch, then depress the brake pedal to see if the rubber bunk is still there. It is easy to replace. Or you can use some double sided adhesive tape and a coin and stick the coin over the hole in the brake pedal.

Oct 02, 2008 | 2000 Nissan Sentra

1 Answer

Brake lights out


Brake light switch, bulbs

Sep 14, 2008 | 2005 Nissan Sentra

1 Answer

Brake light switch


HI
IT WAS LOCATE IN UPPER OF THE BRAKE PEDAL
BEFORE YOU CHANGE IT CHECK FOR :-

STOP LAMP SWITCH AND ASCD CANCEL SWITCH CLEARANCE
1. Twist and pull to remove switch.
2. Pull up on brake pedal pad and hold.
3. Insert switch into retainer until switch plunger is completely depressed.
4. Turn the switch until it locks into place in the brake pedal bracket.
NOTE:
When turning the switch to lock into place, the switch backs off the stopper to the correct clearance automatically.
5. Release the brake pedal pad.

ASK ME FOR MORE ??
WITH MY BEST WISHES

Jul 22, 2008 | 2004 Nissan Sentra

Not finding what you are looking for?
2005 Nissan Sentra Logo

Related Topics:

1,607 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...