Question about 2000 Audi A4

1 Answer

Wipers possitioning Suddently the wipers are stoping in the middle of the window instead of the bottom. Any suggestions as to how to how to reset them to the proper possition? Thanx

Posted by on

  • tasosg8 Nov 18, 2008

    Thanx for the reply. Its a new motor, replaced a month ago. The problem appeared after about an hour of use betw. interm. & reg. I tried pushing them down with the ignition key on & off, same result, they go up again (***** dudes). By the way the car is 03. Propably there is a trick to it like the power windows, ....anybody knows it??





×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 345 Answers

Sounds like you got a wiper motor problem or a sticking wiper rack,see if you can pull them back to the proper position if it is very tight you probably got a tight rack...

Posted on Nov 17, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced winshield wiper transmission assembly on 2004 Grand Am and now wipers rest in the middle of winshield. how do i reset calibration so they rest at the bottom


You have to reinstall the wipers when the motor is at park.if the splines don't match up then you have to adjust the transmission assembly

Oct 04, 2017 | Cars & Trucks

1 Answer

I have a Ford mercury and my ac stoped my Windows stoped working and my wipers stoped but all fuses are good


Possible ignition switch problem. Try gently moving the key back and forth slightly while the wiper switch is in the on position. If they start working then the ignition switch will be defective

Jul 12, 2015 | Ford Cars & Trucks

1 Answer

96 bonivlle I was using wipers the other day when it was raining and went to adjust speed and now they r stoped in middle of my windshield. Any ideas?


This problem can be caused by both a defective wiper motor and a defective wiper speed control module. Both parts are failry expensive so I suggest you have the dealer or a GM savvy shop figure out which is defetive and you can replace the part yourself top save money.

Jun 20, 2012 | Cars & Trucks

1 Answer

I recently changed my wiper motor in my 2003 Hyandai Accent. Now the windshield wipers will not stop at the bottom. When I turn thw wipers on, it goes donw first then up then back and stops in the middle...


Remove the linkage from the wiper motor. Turn the wipers on then off. This will set the motor in the park position. Move the wipers by hand to there normal off position. Reinstall the linkage onto the wiper motor. The wipers should now park or stop in the correct position.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

Sep 08, 2011 | 2003 Hyundai Accent

1 Answer

95 windstar, replaced the wiper transmission and now the windshield wipers wont park in the proper position.brought it to a mechanic and he said it was the wiper control switch.replaced that, he was...


simple actually- 1- on wiper arms- flip up cap on end- remove nut, 2 using a screw driver and small wood block lift arms off driver screw.3 turn key on cycle wipers- turn off 4- reattach arms in correct position and retighten-., test with arms up- not on glass- is still wrong- the link from wiper motor to cross arm wrong- - buy a HAYES repair manual- will show how to remove cowl cover yourself- is easy , then follow instuctions in manual to correct link

May 10, 2011 | Ford Windstar Cars & Trucks

1 Answer

The wipers work in the auxilarry ignition possition ,but not in the run possition.Where is the wiper motor located?


The motor runs the linkage which moves the wipers, so it is under the wipers. Look through the narrow grill area right in front of the windshield and you will see it or the linkage. I would check the switches before the motor if it is running in AUX position.

Dec 21, 2010 | 1988 Ford F 150

1 Answer

How do i get my wipers in the correct spot ?


remove the nuts on the wiper arms ... They may be under a cap ... but are always located at the center of the bottom of the arm...
Turn the wipers on (with arms off) and then turn them off again...
When the wiper transmission has stopped and is at rest ... place the wiper arm on in a possition close to the bottom of the windscreen and lightly tighten the nuts back up...
Test to be sure they are where you want them... being sure they are not resting on the windscreen trim... and tighten and recap the nuts...
Easy Fix Ya !

Sep 28, 2010 | 2002 Pontiac Grand Prix

4 Answers

2000 Saturn LS, windshield wipers park in the middle of the windshield. How can I fix this?


The wipers are parking in the middle because the timing mechanism is off. Once they start doing this it seems to continue to happen so the 1st suggestion is to replace the wiper motor. If U don't want to spend the $ right now it's a pretty easy fix to reset the timing. Park the wipers & remove the wiper arms. Then remove the plastic cowling that covers the wiper motor & the motor assembly. Turn the wiper assembly over without turning the motor. Remove the nut on the arm of the motor. Repostion the arm pointing away from the closet wiper directly inline with the short arm. reassemble.

Oct 24, 2009 | 2000 Saturn Ls 4dr Sedan

1 Answer

Wipers stop in the middle of windshield when turned off


check to make sure the wipers are at its right angle on the vehicle, loose the nuts and place both wipers close to the bottom of the wind screen

Jul 16, 2009 | 2006 Chevrolet Impala

1 Answer

My wiper trun on but when i shut them off they stay in the middle of the window


The wiper crank arm that is bolted to the wiper motor needs replaced. Also there is a tab on the wiper motor bracket that gets bent when the arm goes bad. Bend the tab back up so the new arm will contact the tab and the wipers will go down down when they park instead of up.

Mar 05, 2009 | 2001 Oldsmobile Intrigue

Not finding what you are looking for?
2000 Audi A4 Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Marvin
Marvin

Level 3 Expert

81423 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14423 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...