Question about 2004 Mazda RX-8

3 Answers

I need to know what a yellow (!) followed by three low beeps.

I started my 2004 Mazda RX8 with no trouble what so ever but a minute later a yellow light that looked like (!) with a sqiggly underneath came on followed by three low beeps I have no Idea what they mean this has never happened before and I don't have an owners manual....HELP! PLEASE!

Posted by on

  • Anonymous Jan 06, 2009

    I HAVE 2004 rx8 AND I PUT FIXA FLAT IN THE TIRE AND NOW THE TPMS WONT GO OFF

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Check your tyre pressures and re-set TPMS if necessary.

Posted on Jul 17, 2013

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Bell d is right, its youre tire pressure monitoring system. its a rim mounted tpms that calculates the psi in your tires. if they are low light will come on and beep. so its not a good idea to get aftermarket rims unless you want to pay for the tpms for each tire and have them professionally installed.

Posted on Dec 05, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

This is a tire pressure monitoring light. Check your air pressure.

Posted on Nov 20, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 mazda rx8 will not start until you cycle the ignition three to four times. check fuel pressure and have 58 psi when pump primes system


Usually the crank sensor. I would take a really good look at the electrical plug first. The female connectors in the plug tend to spread apart with heat. And wire tend to break right behind the plug.

Aug 16, 2016 | 2004 Mazda RX-8

2 Answers

2004 mazda rx8 immobilizer system


Try first using the ignition key to unlock the system , in case this is locked.

If it is not this, then you can reset the whole system by unplugging battery cables for ten minutes.

Ensure you have your car stereo code if you decide to unplu the battery, as you will be asked for security code when you connect back the battery.

Oct 29, 2008 | 2004 Mazda RX-8

1 Answer

Changed battery in rain have lights engine turns over but no fire


The rx8 has the rotary ankles engine in it, these have porcelain tipped rotors instead of pistols and are prone to wear resulting in them not starting. The car should start with a bump or toe start. This will require an engine strip down and rebuild and should only be carried out by a qualified mechanic. (Mazda recommend rotors be replaced every 25000 miles)

Let me know if this helps

Dec 31, 2012 | 2004 Mazda RX-8

2 Answers

2004 Mazda RX8 won't start


You already were told by a mechanic what your
cars issues were

Most likely you need a need timing belt or some
sort of engine work

Jul 04, 2012 | 2004 Mazda RX-8

2 Answers

Just recently bought a 2003 Mazda RX8. Everything fine until I came to set of traffic lights about 10 miles from home and the engine stalled and I could not re-start it. Got towed home and then tried the...


You say he removed the fuel pump fuse? Do you mean he changed the fuse? The fuel pump can't work without the fuse. Perhaps the fuse is blowing and causing the engine to stall and not restart. Find the fuel pump relay and swap it with another relay of the same type. Make sure the fuel pump fuse is good. If the engine starts, drive it around close to home until you think it's had time to stall out again. If it down'nt stall this time then the relay is bad and needs to be replaced.

Jan 05, 2011 | 2004 Mazda RX-8

1 Answer

Power steering electronic over hydraulic is not working properly on my 2004 Mazda rx8 no power steering


Hi,

my 2004 RX8 has the same problem - can you let me know if you get a fix. deantom22@sky.com

Thanks very much

Dean

Feb 15, 2010 | 2004 Mazda RX-8

2 Answers

MAZDA RX8 2004 Took it out of garage , then put it


Check to see if you are getting fuel to the engine.If not replace the pump relay.Then change the pump if still not working.Check for spark at the wires if you have no spark then change the crank sansor.If still no spark then change the coil pack.

Jul 19, 2009 | 2004 Mazda RX-8

1 Answer

2004 RX8


hopefully you didnt use too much starting fluid. you dont want youre rx8 to be a crack baby. but as ardyrr said it is common for plug fouling and packs going bad. check packs for discoloration on the back side. if present, replace packs. if plugs are fouled replace them too. wires are probably damaged too or next in line to go. and when replacing parts please use oem or performance parts. cheap aftermarket parts will only cause more problems in the near future.

Oct 06, 2008 | 2004 Mazda RX-8

Not finding what you are looking for?
2004 Mazda RX-8 Logo

459 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...