Question about 2002 Chrysler Sebring

1 Answer

Hard start and stalling with back fire when give it gas fast

Hard start runs good at idle.drive good if u give it gas slowely.it back fire all time when give it gas very fast.

Posted by on

  • Anonymous Mar 16, 2014

    tacoma cold start feels like not getting gas then gives a back fire sound have to hit gas pedal many times to get it started

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sounds like you have spark plugs mixed up ever had them replaced

Posted on Nov 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hard to start keeps cranking then fires over and engine flutters but still doesnt start till 2 more times then when you take off you give it gas and it bougs down and no power pops then after it warms up...


check for codes, if none then check fuel pressure and volume with a gage. pressure should be in the area of 35lbs unless this is throttle body which is about 15/18lbs pressure, if this is a vortec motor the pressure is 55lbs. the volume should be about 1 liter in 15 seconds. the vortec injection systems have a problem with the spider fuel lines that go to each injector cracking/breaking causing no fuel supply and leaking into the intake manifold and not going into the cylinders.

Aug 23, 2014 | 1999 GMC Suburban

1 Answer

My 1988 pontiac firebird back fired and stalls out


Before you spend a ton of money, have the timing checked

Apr 03, 2014 | 1988 Pontiac Firebird

2 Answers

Stalls after start up, Stalls when braking, then runs fine after a few minutes


Check the ECU engine temperature sensor. If it thinks the engine is hot, it will struggle to run when cold.

Mar 06, 2014 | Volkswagen Beetle Cars & Trucks

1 Answer

What causes car to stall when u give gas real fast but runs fine when u idle it up slow and hold it at 2000rpms and then takes awhile to start sometimes??


when you accelerate real fast you are getting the CPU to allow large amounts of fuel into the chambers to be burnt. Un fortunately if everything else is not prepared for this surge of fuel it puts the fire out as combustion requires a ratio of 14.1 to combust properly. When you accelerate slowly the faulty sensors struggle to keep the ratio right. So run the fault codes and check which sensors are failing .

Jan 11, 2014 | Cars & Trucks

1 Answer

2001 tahoe 5.3 stalls in a slow hard turn to lft or rt. Service eng light on. checked power steering(good). found that wife didnt put gas cap on correctly. been loose for a few days while driving. just...


What codes do you have?

You have a service engine lamp on
Have to start there

Also the turning thing, tells you something,maybe

The idling won't do a thing

The EVAP System may not run a monitor for days
& you have to drive under certain conditions for it to run

Sep 20, 2011 | Chevrolet Tahoe Cars & Trucks

1 Answer

My van ran out of gas! I got it started and made it to a gas station I put $5 in the tank enough to get us home! The next morning it would not start! so my neighbor went and got $10 of gas for me but it...


It would be good to know the make, year and model of the van to do a diagnosis. I'll take a stab in the dark, High reving could be caused by a faulty idle air control motor, common on a Ford. Is the Service Engine Soon light on? A malfuntioning Throttle position sensor will cause a high idle. I wish I had more info so I could be of help, Good luck, Gary

Jul 25, 2010 | Cars & Trucks

2 Answers

Throttle/Idle/running problem - wants to run too fast, or stall out


RPM's up and down check EGR valve and sensor. EGR valve and sensor control idle. That's why your getting the surging on rpm's and this could be giving out the other codes. If mass flow was bad car will not start and the same for the map sensor. O2 sensor measures gas and air for right mixer. TPS controls 0-60 speed as in throttle respons.

Apr 28, 2009 | 1989 Pontiac Grand Prix

1 Answer

Stalling runs ok then cuts out


sounds like the timeing belt is bad.

Jan 09, 2009 | 1996 Saab 900

1 Answer

2000 grand cherokee v8 struggles to start and stalls when slowing


i think your exhaust might have a leak which is heating up your oil when this happens the engine suffocates and wants to die.

Dec 02, 2008 | 2000 Jeep Grand Cherokee

2 Answers

2000 323i stalling when i slow down


Here is what you need to do, a cleaning of the intake throttle blade and the idle speed control air-bypass valve, they get full of gunk over the miles and cause idle issues (stalls) like yours,
Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the engine at idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake

Oct 28, 2008 | 2000 BMW 3 Series

Not finding what you are looking for?
2002 Chrysler Sebring Logo

Related Topics:

239 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...