Question about 1999 Daewoo Lanos

1 Answer

Front brakes stick on

Daewoo Lanos sx 1.6
after driving for about 10 minutes the front brakes stick on and the brake pedal is solid

Posted by on

  • 2 more comments 
  • Anonymous Dec 11, 2008

    same problem with a 99 fiesta zetec. After about 10 mins driving the front passenger brake sticks on making v difficult to build up any speed. Brake disc was glowing red!!!

  • ernest257 Dec 13, 2008

    1993 chevy silverado. Front driver side brake locked up and the rotor got hot and turned red.

  • Anonymous Jan 29, 2009

    vauxhall vecta with abs font brake sticking on

  • Anonymous Mar 19, 2014

    all brake parts have been replaced except brake lines

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Either your calipers are sticking and need replacing. OR the hoses have failed internally. and need replacing.. very rare but possible the master cylinder is not allowing the fluid to return usually caused bu a booster failing and causing some down travel in the master cylinder. I'd start by raising the front end up. appling hard brake pressure. turn the tire.. then loosen the brake bleeder to check for pressure. if the bleeder sprays fluid and the brakes release forget the calipers. if they are still tight then replace the calipers. pump them up again if they released.. and break the line free at the master cylinder. if they don't release then replace the hoses..

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 Daewoo lanos 1.6 16v sx,sometimes engine revs up till 1500 2000 rpm? ? help please!


You have a IAC (Idle air control valve) Its sticking your solution is to replace it

Mar 10, 2012 | 2001 Daewoo Lanos

2 Answers

H!i I need some info about a 2000 daewoo leganza SX. I have replaced the rear calipers, master cylinder, and booster, but I am still having issues about the brake pedal being soft. The front calipers are...


did you bench bleed the master cylinder before putting it on car ! if not, you have air trapped in the lines and it needs bled out. if there is no leaks in system. have a good day !

Apr 18, 2011 | 2000 Daewoo Leganza

2 Answers

I have a daewoo lanos 1999 and when I press the brakes the brake light does`nt turn on what should I do?


It could be one of three things, the bulbs could have burnt out only for the brake filament...replace a bulb and check.
There is a sensor under the brake pedal that turns those lights on..that could be broken, it looks like a button.
Could also be a fuse, but thats the least likely.

Mar 02, 2011 | 1999 Daewoo Lanos

1 Answer

Spark plug order installed new plugs and leads but lost the order


For the 2002 Daewoo Lanos:
Includes ALL Models:
S and SX Sedan
S and SE Hatchback

All have the 1.6L DOHC In-Line 4-Cylinder:
Firing Order:
1 - 3 - 4 - 2

Cylinders:
..........(back)..........
|...1....2....3....4...|
.........(front)

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Jul 03, 2010 | 2002 Daewoo Lanos

1 Answer

Car wont idle


idle stepper motor(IAC) controls idle speed it is located on throttle body
f33d4ad.jpg IDLE LEARN PROCEDURE
Whenever the battery cables, the electronic control
module (ECM), or the ECM fuse is disconnected or replaced,
the following idle learn procedure must be performed:
1. Turn the ignition ON for 5 seconds.
2. Turn the ignition OFF for 5 seconds.
3. Turn the ignition ON for 5 seconds.
4. Start the engine in P/N (park/neutral).
5. Allow the engine run until the engine coolant is
above 85_C (185_F).
6. Turn the air conditioning (A/C) ON for 10 seconds, if
equipped.
7. Turn the A/C OFF for 10 seconds, if equipped.
8. If the vehicle is equipped with an automatic transaxle,
apply the parking brake. While pressing the
brake pedal, place the transaxle in drive (D).
9. Turn the A/C ON for 10 seconds, if equipped.
10. Turn the A/C OFF for 10 seconds, if equipped.
11. Turn the ignition OFF. The idle learn procedure is
complete.

May 07, 2009 | 2000 Daewoo Lanos

2 Answers

Daewoo lanos


its the rotors are warped .. if you are saying when applying the brakes they are jerking in the pedal right ?/ its the rotors are warped and need replaced if this is what you are asking .. your abs should be ok i think its rotors ..

Feb 06, 2009 | 2002 Daewoo Lanos

2 Answers

Rubbing noise on drivers side coming from wheel


Could be a bad bearing or a brake dragging. Roll the car slowly with the engine off. Walk beside the car and if you hear the noise, you'll be able to tell more about it if the engine is off. Try pushing on the brake pedal as the car is being pushed and see if the noise changes.
If it does, then you can eliminate one cause.

Feb 02, 2009 | 1999 Daewoo Lanos

1 Answer

How doi check fluid level in auto tranny on 2001 daewoo lanos


You do not check your fluid by removing the plug. That is the drain plug thats on the bottom. You pull the dip stick out that under the hood usually around toward the back or the motor. There will be marks on it that has cold mark and hot mark. Let the car warm up engage the emergeny brake, put in drive, check level on dip stick. should be at the top mark that says hot.

Jan 20, 2009 | 2001 Daewoo Lanos

1 Answer

Daewoo front brakes


The single-piston floating-caliper disc brake is self-centering and self-adjusting. The caliper is able to slide from side to side so it will move to the center each time the brakes are applied. Also, since there is no spring to pull the pads away from the disc, the pads always stay in light contact with the rotor (the rubber piston seal and any wobble in the rotor may actually pull the pads a small distance away from the rotor). This is important because the pistons in the brakes are much larger in diameter than the ones in the master cylinder. If the brake pistons retracted into their cylinders, it might take several applications of the brake pedal to pump enough fluid into the brake cylinder to engage the brake pads

f57055e.jpg

Aug 25, 2008 | 1999 Daewoo Lanos

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

885 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63242 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...