- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Sounds like a network communication issue.
Modules connected to the class 2 serial data circuit monitor for serial data communications during normal vehicle operation. Operating information and commands are exchanged among the modules. When a module receives a message for a critical operating parameter, the module records the identification number of the module which sent the message for state of health monitoring/node alive messages. A critical operating parameter is one which, when not received, requires that the module use a default value for that parameter. Once an identification number is learned by a module, it will monitor for that modules node alive message. Each module on the class 2 serial data circuit is required to send a Node Alive message every 2 seconds . When no message is detected from a learned identification number for 5 seconds , a DTC U1???.
??? is equal to the 3 digit identification number of the module. Control Module ID = BCM
I would start checking ALL ground wires/straps on this vehicle. That has been a problem with GM. Try clearing the code and see if it comes back after you clean ground connections.
outintheshop.com/faq/casting/castings2.htm Chevy Block Casting Numbers. Use these casting numbers to identify the block you have. ... 283. car & Truck 2-bolt. 3790721. 64-67. 327. 2-bolt Chevy II Nova Recessed filter. 3791362. 66-67. 327 ...... Vortec Truck L-35. 12554290. 350. 94-96.
run your Vechicle Identification Number by your dealership and they will be glad to give you the stepper motor number, availability and cost for installation.
Can't tell you direct, in the UK you can contact a parts supplier and provide the vehicle registration number, they have a data base that should be able to give you the info.
THE ENGINE SERIAL NUMBER IS STAMPED ON THE SIDEWALL OF THE CYLINDER BLOCK AT THE TRANSAXLE SIDE. THE BODY NUMBERS IS ON THE VECHICLE IDENTIFICATION NUMBER PLATES LOCATED AT THE TOP LEFT OF THE INSTRUMENT PANEL.AND AT THE FIREWALL IN THE ENGINE COMPARTMENT.YOUR VECHICLE REGISTRATION IDENTIFICATION CARD IN GLOVECOMPARTMENT HAS VECHICLE IDENTIFICATION NUMBER.THE 17TH DIGIT CODE IDENTIFIES MODEL - YEAR - BODY TYPE. NUMBER 8 COUNTING FROM THE LEFT IDENTIFIES THE ENGINE USED IN VECHICLE.
×