Question about Hyundai Motor 1998 Accent

1 Answer

Wiper blades how do you remove the wiper blades on a 98 accent to replace them?

Posted by on

  • darrelj Dec 11, 2008

    How do you take the wiper blades off a 2001 sebring.



    Thks dw

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi from uk to remove wiper blades? lift the wiper arm off screen to fully up then turn wiper blade upwards so as to make letter T then if you look at the horseshoe type bend on the arm? where blade fits you will see a little press clip which is part of the wiperblade fitting/securing ? to this blade u section just press clip in with finger and at same time push blade downwards out of the u part of arm then you can refit new blade/s the drivers and passenger wiper blades are different lengths when you fit new blades be sure the clip locks into place ? hope this is clear instructions to understand ?

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you replace the wiper motor on a 98 rodeo


the front or rear, no way for me to guess?????
unbolt it and replace it.
start at the arms and work inward works.

ill toss coin land on front.
ill read the FSM online for you, so can you , but here ill do it.

Motor
  1. Disconnect the negative battery cable.
  2. Disconnect the wiper power motor connector (2).
  3. Remove 4 mounting bolts.
  4. Remove the nut of the wiper motor shaft, and disconnect the linkage.
  5. Remove the windshield wiper motor (1).
To facilitate the removal of the nuts, be sure to put out the tip portion of the linkage sufficiently through the mounting hole of the motor by sliding the wiper blade slowly.


my guess is this the most easy motor on earth to change.
its in plain view, not burried deep in a cowl.....

it's
easy-peasy-japanesy..

Feb 22, 2015 | 1998 Isuzu Rodeo

1 Answer

Windshield wiper motor works blades wont move 2001 hyundi accent


the problem you have is the nuts that hold the wiper to the motor came loose . just need to be tighten12_7_2012_5_06_31_pm.jpg

Dec 07, 2012 | 2001 Hyundai XG300

3 Answers

Passenger windshield wiper does not work, driver side does work. wiper blade frame or wiper motor?


Most likely it is the linkage between the driver and passenger blade arms. The easiest way to find out is to remove the cowling and look...you should see the wiper motor, the motor arm that links to the driver arm and the linkage between the driver arm and passenger arm...this is held together by a plastic clip and that clip is most likely going to be broken when you look...it's fairly easy to replace.

Jan 22, 2010 | 2001 Hyundai Accent

2 Answers

How to remove and replace the wiper blades on an 06 Murano


Me again. After looking at the blade for 15 minutes or so I did the following. Remove the wiper blade from vehicle (makes it easier to work on). There is a little tab under the blade near the end of the wiper blade arm. Press it and slide/pull the wiper blade toward you. Now when you look at the wiper it seems like its a sealed unit. Check the ends and you will see the rubber is flexibe enough to allow you to slid the "wiper" out ot the blade. You can get the replacement refill (the wiper) or a replacement wiper blade (the whole unit) from the Nissan dealer. Take the refill and slide into the blade assembly. Take your time. You might have to straighten the blade a little so that the refile lines up with the holding tabs in the blade. Looks impossible, but once you've done it you'll be surprised how simple it was to do......****

Dec 21, 2009 | 2006 Nissan Murano

1 Answer

I cant figure out how to change my windshield wiper blades on 2001 ford ranger


How to Replace Wiper Blades Guide (Typical):
Potential tools needed to replace wiper blades:
  • Flat blade screwdriver (small)
  • Small nosed pliers
  • Latex or vinyl gloves
  • Safety goggles
To replace wiper blades theactual action of replacing the blade is no big deal, it's the locationof the blade down below the hood that can make it difficult though.Sometimes it helps to open the hood to gain access to the wiper blades.Other times it is helpful if the wiper blade is somewhere in the motionline of wiper action. The trick is to get the wiper to stop somewherein the wiper arc. Turn the wipers to the on position and allow thewipers to start, and then shut the key off when the wiper has arrivedin a desirable position on the windshield. To replace your wiper bladesplease follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
  • Step 1: With the hood closed, turn the wiperson, when the wipers are in the middle of their arc turn the key to theoff position. (Note: if this can't be done because of wiper conditionand you want to avoid scratching the windshield please open your hoodto gain access)
  • Step 2: Locate the mounting clips at the top pivot on the wiper blade
  • Step 3: Release the clip and remove the wiper arm
  • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
  • Step 5: Reinstall the new wiper blade and recheck wiper operation

Common Problems:
  • Make sure the wiper blades are the same size as the original blades.
  • When replacing wiper blades not getting the blade onthe mounting pin completely allowing the wiper arm to become dislodgedand possibly causing damage to the windshield.
  • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
  • Wiper blade can create a chattering noise when theblade is not properly balanced allowing the blade to "flop" back andforth as the wiper direction changes.

I hope help you with this (remember rated this help) Good luck.

Sep 16, 2009 | 2001 Ford Ranger Regular Cab

2 Answers

How do I remove front wiper blades to replace with new ones on my 2006 nissan quest


How to Replace Wiper Blades Guide:
Potential tools needed to replace wiper blades:
  • Flat blade screwdriver (small)
  • Small nosed pliers
  • Latex or vinyl gloves
  • Safety goggles
To replace wiper blades the actual action of replacing the blade is no big deal, it's the location of the blade down below the hood that can make it difficult though. Sometimes it helps to open the hood to gain access to the wiper blades. Other times it is helpful if the wiper blade is somewhere in the motion line of wiper action. The trick is to get the wiper to stop somewhere in the wiper arc. Turn the wipers to the on position and allow the wipers to start, and then shut the key off when the wiper has arrived in a desirable position on the windshield. To replace your wiper blades please follow the step by step instruction below. Also, watch the How to replace wiper blades video below to gain additional information. The method in which the wiper blades are attached will vary slightly.
  • Step 1: With the hood closed, turn the wipers on, when the wipers are in the middle of their arc turn the key to the off position. (Note: if this can't be done because of wiper condition and you want to avoid scratching the windshield please open your hood to gain access)
  • Step 2: Locate the mounting clips at the top pivot on the wiper blade
  • Step 3: Release the clip and remove the wiper arm
  • Step 4: Match the size of the old blade against the new blade to ensure proper fit and operation
  • Step 5: Reinstall the new wiper blade and recheck wiper operation

Common Problems:
  • Make sure the wiper blades are the same size as the original blades.
  • When replacing wiper blades not getting the blade on the mounting pin completely allowing the wiper arm to become dislodged and possibly causing damage to the windshield.
  • Using wiper blades after the blade has failed permanently damaging the windshield by craving scratches in the wiper arc.
  • Wiper blade can create a chattering noise when the blade is not properly balanced allowing the blade to "flop" back and forth as the wiper direction changes.

I hope help you with this (remember rated this help) Good luck.

Sep 14, 2009 | 2006 Nissan Quest

1 Answer

How to replace the wiper insert at the back of


moz-screenshot.jpg
  1. REMOVE RR WIPER BLADE
    1. Raise the rear wiper blade to the position as shown in the illustration where the meshing of the claw disengages with a clicking sound. NOTE: Be careful not to break the claw.
    2. Pull straight the rear wiper blade to vehicle's left from the wiper arm. NOTE: Do not fold the rear wiper arm with the rear wiper blade removed from it.1722d05.gif

  1. REMOVE REAR WIPER RUBBER
    1. Place the rear wiper with the rear end of the rubber protruded from the blade stopper as shown in the illustration. NOTE: Do not pull out the wiper rubber forcibly, as the backing plates will become deformed or the blade claws will become damaged. HINT: The rubber can be easily pulled out by pushing the middle area of the blade.
f54b10a.gif
  1. INSTALL REAR WIPER RUBBER
    1. Install the 2 wiper rubber backing plates to the rear wiper rubber. NOTE: Be careful to observe and keep direction of curvature for correct replacement.
0dd144d.gif
b. Insert the rear wiper rubber from the claw of the middle of the rear wiper blade into the rear end position.
8f40009.gif
c. After passing the rear wiper rubber through the rear end side claw, protrude it from the rear end stopper and pass it through the front tip side claw.

Sep 12, 2009 | 2005 Toyota Matrix

1 Answer

Removing wiper blades


6eb8291.gif To Remove:
  1. Before servicing the vehicle refer to the precautions at the beginning of this section.
  2. Turn the ignition switch to the ACC.
  3. Set the wiper switch to the PULSE.
  4. Turn the ignition off when the wipers are in the innerwipe position.
  5. Depress the wiper blade clip button
  6. Remove or disconnect the following:
    • The wiper blade from the inside of the wiper arm
gm_mv_ven_wiperbladel.gif
  • The wiper arm out through the opening in the wiper blade
  • To Install:
    1. Install or connect the following:
      • The hook of the wiper arm through the wiper blade opening
      • The wiper blade pivot into the inside radius of the wiper arm hook
      NOTE: Pull the wiper blade until the pivot locks into the hook.
    2. Check wipers for proper operation.

    Mar 30, 2009 | 2003 Pontiac Montana

    2 Answers

    Trying to change windshield wiper motor


    If you take off the wiper blades, then remove the plastic covering under the windscreen, the motor is underneath it. All it will be is two maybe three bolts and an electrical connector.

    Feb 08, 2009 | 1999 Hyundai Accent

    1 Answer

    98 camry windshield wiper


    You will have to change the swich that control the wiper blades cause sometimes they go bad

    Dec 12, 2008 | 1998 Toyota Camry

    Not finding what you are looking for?
    Hyundai Motor 1998 Accent Logo

    290 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    64034 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    21990 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    6812 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...