Question about Mazda Millenia

1 Answer

I have a 2000 mazda millenia s and for some reason my dash lights stopped working I tested the back of the cluster there is power going to the light bulbs but there not turning on, I noticed that when i turn on my head lights my clock and heat control lights go out but when the lights are off the heat control lights and clock come back on? I also noticed that when i test the light dimmer switch there is no power showing on the test light could this be a bad ground on the dimmer switch? Please Help Me Thanks.

Posted by on

  • 4 more comments 
  • mazdaman149 Nov 16, 2008

    done that still nothing.

  • mazdaman149 Nov 16, 2008

    i have come to the point where I am almost sure it's because there is no power going to the light dimmer switch could this be why my dash lights are not working in my 2000 millenia s, And why or how can i find the source of this problem?

  • mazdaman149 Nov 17, 2008

    My headlights turn on my turnsignals work my high beams and low beams work my brake lights work everything works but my dash lights. Like i said before there is no power in the three wires going to the dimmer switch? Why would this be?

  • Anonymous Dec 12, 2008

    i have the same problem

  • Anonymous Dec 27, 2008

    my mazda mx-5 has the same problem

  • Anonymous Mar 17, 2014

    Dash lights work but will not glow brightly. The dimmer switch works fine too. The dash light section where the vehicle mileage should illuminate does not glow at all. Any suggestions?



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert that hasĀ over 500 points.


    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Try turning switch up when testing

Posted on Nov 16, 2008

  • darin brown Nov 16, 2008

    chances are is is the multi-switch(turnsignal/light switch) which sends power to dimmer.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What does the sillenoid do for 1999 mazda mllenia?

Their are Individual Fuses for many systems, a "Solenoid" is basically a ON/OFF or a Electrical Motor and what they do is open or Close something. My questions is what Happened when they ALL Stopped, have you checked power with a Test Light on BOTH SIDES of the Fuse to ensure you had power Coming IN and Going OUT?

Feb 10, 2015 | 1999 Mazda Millenia

1 Answer

Airbag light flashing of mazda millenia 2000

My personal suggestion would be to go for these repair catalogs. I know this website that i used to get manuals from, and they have all models online.
I also brought for my 1989 BMW, such old model, they had it and it was very good manual. Go ahead, I bet.

Feb 28, 2018 | 2000 Mazda Millenia

1 Answer

My 2000 Mazda millenia s just failed the smog test do to a malfunction indicator light what do I do

Before you re-test (smog test) ___ I added 3 bottles of injector cleaner in a quarter tank of gas. PASSED!!! Also you can go to a service station and ask them to clean up your injectors; or change the injectors if they are fouled.

May 07, 2012 | 2000 Mazda Millenia

1 Answer

I have a 2000 Mazda Millenia. It just stopped in

sounds like one of the parts they replaced is bad first thing to do is have it scanned to see what the check engine light is on for then let me know i would say bad wire or plug that was installed and what kind of plugs they put in it

Jan 07, 2010 | 2000 Mazda Millenia

1 Answer

My hold light is flashing in my 2001 mazda millenia

hold light flashing means you have a transmission fault of some kind, check vehicle speed sensor

Jul 02, 2009 | 2001 Mazda Millenia

1 Answer

Need to know how to reset the abs warning light, repairs have been made

The ABS light will stay on only when a problem exists. Once repairs have been completed and no problems exist the ABS light will go off on it's own. Take the car back to where you had the work done and have them fix it. It shouldn't cost you anything. If the ABS light was not "on" when you took the car to them, DO NOT let them charge you to fix it. They caused the problem. They can fix it. Good luck. Hope this is helpful.

May 13, 2009 | 2000 Mazda Millenia

4 Answers

Beeping noise from a 2000 Ford Expedition

Replace your air bag light. It's prob. burned out.

Apr 22, 2009 | 2000 Ford Expedition

1 Answer

Car trouble

it sounde like burned exhaust valve, make copression test.

Jan 18, 2009 | 2000 Mazda Millenia

1 Answer

Check engine light

yes the sensor and it will not go away on Mazda Millenia even though you replace that code it will show another one Mazda Millenia Sucks & Mazda Parts are Expensive too

Jan 15, 2009 | 1998 Mazda Millenia

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

247 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides