- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
some of these have had problems with the dash assembly causing alot of problems with gauges and lights and speedometers.if there are no codes in the computer and weren`t any before you replaced the vss sensors then you spent money you didn`t need to.
these damn things do this all the time, my 03 ? you cant count on it to work any day of the week ! you just get lucky and it works. I get all lights flashing, i get the nuetral light on yet it is in 2 hi. I'm tired of all the codes and replacing parts, 700.00 dollars later and still the same. I just drive it and it fixes itself in a day, maybe next time i start truck. It worked the best when i sealed all the electrical plugs in moisture proof wrapping,but a few months later and its a guess game again so i just drive it !
you cannot run your truck normally in 4x4 low!!!! the low is designed to go slow slow.try shifting into neutral gear on column tap the high 4x4 then shift to reverse,back up 15feet then shift to drive.it should go into high 4x4 then if you want to go back to 2wheel high shift to neutral tap the 4x4 high until the light goes off,shift to reverse and back up 15feet then shift to drive and the 4wheel drive lights should all be off. then you'll be in 2x2 rear wheel drive. thank you for choosing fixya.com
Does the trans fluid have a burnt smell and is it brown or dark brown as opposed to a red wine color? If this is the case then you may have a service issue caused by a clogged trans filter which is what this sounds a great deal like and the sooner you get the truck to the dealer or your mechanic the better as the trans in these are not cheap to rebuild or replace.
this is common on these trucks just put your witch in 2 wheel and go ahead and drive it will let loos when it sees the correct secquence and drive a little and shift to netural.
just neve do it from high to low range
I had that problem in my 1998 Blazer. There is a module on the passenger side of the truck, next to where the passenger right foot be. Remove the side kick panel to get to module. Disconnect battery before unpluging and pluging new mudule in. This unit controls the electronic switching between 2 and 4 wheel drive..Wes