Question about 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer radio turns on but there is no sound

The radio in my 1996 chevy blazer stopped working suddenly. The radio will trun on but no sound will be coming out. The sound used to come back on if I just turned the radio on and off a few times, but now there is no sound at all no matter ho many times I turn the sterero on and off. I mean out of all the speakers in the car none of them have any sound. I tried looking behind the bottom art of the dash but all I see are wires taped together and I can't figure out what goes where. I tried try the fuses but that didn't work. Any Help please?


Posted by on

  • Anonymous Nov 20, 2008

    Weird, I have the same problem with my 96 Blazer. This model seems to be falling apart slowly after I hit 100,000 miles. Now the radio is dead. Not sure how to have it fixed or to just let it go.

  • Anonymous Mar 31, 2014

    i have a nissan murano 2006 , i tried to install a new radio by my self and at first i did every thing right but i forgot to wire the blue amp wires together which caused to only turn on the radio but no sound was coming . after that i decided to attach the wires but this time i forgot to turn of the car battery which cause the 15 fuse to get burnt ,, i replaced the fuse and rewired the blue wires ,,, now every thing is working but not the back speakers, even tho their wires are attached properly ,,, soo please help ,,



1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 121 Answers

I have a strong feeling that the head unit "radio" has finally gone bad. You describe a situation, in which you have to turn it on and off, to get it to work. Typically if the sound comes out of all speakers, after doing that, then the speakers were never broken. The head unit itself should be replaced. I hope this helps.

Posted on Nov 16, 2008

  • busybudah May 30, 2011

    What if you replaced the head unit and hooked everything up correctly and then everything comes on but the screen on the radio it will even still take a disc, on a 96 blazer.



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

96 chevy blazer turn signals and stop lights quit working

make sure your 4way emegency flashers are not turned on... and if they are... then your 4ways' fuse should be checked and replaced.

Mar 23, 2013 | 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer leaking fuel when turning key

Sounds like a damaged fuel line or connection

Jan 30, 2013 | 1996 Chevrolet Blazer

1 Answer

99 chevy blazer won't reverse

Sounds like it could be a faulty reverse shift solenoid.

Oct 31, 2012 | 1999 Chevrolet Blazer

2 Answers

The car stops suddenly, after slowly losing power. Started up again, to move off to side of road. No longer started after that. checked oil, it was milky looking, so we changed it. checked the battery, it...

sounds like the head-gasket blew, and the fuel pump may have gone out. I would really have to be there to know for sure. I guess you need to see if you have spark, and if fuel is coming to the engine, may have had a fuse or two go out, also. Good Luck Tim

Oct 23, 2010 | 1996 Chevrolet Blazer

1 Answer

Loud ticking sound all of the time

Are you sure its not an exhaust leak ..? They can sometimes sound like a ticking noise and the noise will change with temperatures of engine.. ? also if you can borrow a stethicope from someone which is used in automotive repair alot (different than what your doctor uses) this will help you pinpoint the problem .. It sounds to me with out hearing it you have a loose rocker arm possably .. If this is the case this is a easy fix and very inexpensive. just figure which side its coming from take the valve cover off and tighten it till it stops ticking and then give it 1/4 turn. Holler if you need more Jerry

Apr 23, 2009 | 1996 Chevrolet Blazer

1 Answer

Trun on key and fuse popping for ins fuse.

hi it sounds like you have a wire somewear that is touching a ground.

Jan 29, 2009 | 1996 Chevrolet Blazer

2 Answers

Delco radio in 95 blazer

With key in "on" position, but pickup not started, press the "SET" button and the "channel up" button (aka "TUNE +"). "SET" appears in radio window.

Now the "SEEK" button will increment hours and the "SCAN" button will increment minutes.

Once correct time is set, press "SET" button again to get out of clock set mode. "SET" will disappear from radio window.

Jan 08, 2009 | 1996 Chevrolet Blazer

2 Answers

96 blazer power seat stopped working?

there is a orange wire on the seat connector. follow it under the floor mat just under where you put your feet down . that gets corroded and breaks loose. fixed mine twice in 10 years and still working

Dec 28, 2008 | 1996 Chevrolet Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

800 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides