Question about 2002 Mitsubishi Galant

2 Answers

Trottle dosen't give a steady feed to the Engine and therefore the Jeep is "Jumpy" or dosen't run smoothly. The Jeep is a Mitsubshi shogun SWB 3.2 Litre Diesel 2005. How can I correct this Problem ???. KD

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Mitsubishi Master
  • 22,011 Answers

Remove the cable and hang it up and give it good oiling,if that doesnt work then go to dealer as its a common rail system and all sensors and electronic gizmos controled by the ECU.and you could end up paying for a lot of sensors that dont need changing.Modern cars are not designed for the weekend mechanic anymore they are designed with object in mind of dealer only so dealer and manufacturer make money and not your general mechanic or owner doing it himself and your local spares shop .so dont buy a renault with encrypted software

Posted on Nov 15, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mitsubishi Master
  • 67,912 Answers

Sounds like the injector pump has a problem, have that tested first.

Posted on Nov 15, 2008

  • yadayada
    yadayada Nov 16, 2008


    alicantecoli never such a bunch of gibberish in my life, give it a rest.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No spark in one cylinder


swap the coil with another cylinder and see if the skip changes

Sep 08, 2012 | 2002 Toyota Camry

1 Answer

Gas pedal hard to push and wont accelrate and have vibration around transfecase


gas pedal a bind in cable or stuck trottle body plate stuck or broken springs at trottle body. vibration drive shafts of transfer case going out ck fluid for metal ck shafts.

Jul 29, 2012 | 1997 Jeep Grand Cherokee

1 Answer

Car keeps staling already changed trottle body did


check for engine vacuum leak using GUMOUT carb cleaner,spray around the intake manifold when the engine smoothes out you found the leak

Nov 08, 2009 | 2000 Dodge Intrepid

1 Answer

Problem while driving 1987 jeep cherokee


Your engine is stumbling "off idle" - as it switches from idle to throttle control. The idle air motor regulates the air flow and engine speed at idle. If the idle is smooth but the stumble occurs just as the throttle is pressed this isn't the problem, The MAP sensor is mounted in the middle of the firewall behind the engine just below the hood. It has to sense the manifold vacuum drop when the throttle is opened. This my first suspect. Second would be the fuel pressure regulator. If it runs O.K. after you get it going, this is a weak suspect unless it loses power when pulling. A bad fuel pump, again low fuel pressure. Just like the squirt from the accelerator pump in the carburetor days, the injectors have to deliver a good stiff shot of fuel when the throttle opens to keep the engine from stumbling. The MAP sensor will tell the ECM a squirt is needed but the fuel system has to have the pressure to deliver.

Jun 08, 2009 | 1987 Jeep Cherokee

1 Answer

Code po370 po238


put a mechanical fuel gauge and long fuel hose on the bleed valve on water crossover run it in the cab and opserve pressure, should be 3 psi at idle and min 1 psi wide open trottle. on steady run fuel pressure should stay steady too,about 3-4 psi, if it fluctuates from o psi to whatever, it could be interupted power to the LP. failing OPS ??
Try above first.

what are the codes for??

Jul 07, 2008 | 1996 Chevrolet C3500

Not finding what you are looking for?
2002 Mitsubishi Galant Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

67912 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22011 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...