Question about 2002 Isuzu Trooper

1 Answer

I need to replace front sidelight bulb on 1997 isuzu bighorn

According to manual i need to undo screws and then pull whole unit out.
however i can only see one screw at top which i have undone but the unit won't pull out

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 73 Answers

They can get stuck in there , I have usually had to give it a jarring smack forward . Just use the palm of your hand and come from the side of the car. Your other option is to wedge a flathead screwdriver between the lens ans fender and twist the screwdriver to pry them apart. Be careful if you use the screwdriver because you can scratch fender if you do not use a shop towel to cover the screwdriver.

Posted on Nov 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sidelight bulb change suzuki


03 GV
its in the operators guide, in the glove box.
on all cars there are 3 ways.
1: remove front screws, if present.
2: remove rear screws.
3: pry off cover. front.
how to you tell which from what? ans: lack of screws.
$4 day pass.
https://suzukipitstopplus.com/Products/1041-2003-grand-vitara-owners-manual.aspx

the full FSM is there too. see body section.

my 04
has only laps on front bumper, ends. and 2 screws, in lens.
did you look first?

Mar 28, 2014 | 2003 Suzuki Grand Vitara

Tip

Sidelight bulb replacement on 1997 toyota corolla


open up the bonnet and you should see a screw attaching to the sidelight cluster. this is the only screw to... unscrew. after this pull the sidelight straight forward not sideways or any other way, then you should be able to access the bulb. putting it back is basically all that in reverse, just observe the little clip on the back of the cluster that it goes into the hole its meant to :-)
hope this helps as i had trouble at first

on Feb 21, 2009 | 1997 Toyota Corolla

1 Answer

How do i replace the sidelight bulbs on my 1999 audi a4? do i need to take the whole headlight unit off or is there a simpler way? I can get to the wires that conect to the sidelight bulb but my fingers...


You don't need to remove the whole headlight but instead the side light bulb is normally clipped to the headlight.Some are held by a small cover which you either need to rotate it or unclipped it out.Hope this helps.

Dec 15, 2009 | 1996 Audi A4

2 Answers

Unable to change 2009 sidelight bulb


On the sidelight, there is a Phillips screw which is hidden by the headlamp assembly. Remove headlight assembly and look for the Phillips screw. Once unscrewed, pull lens unit straight out and then you should be able to change bulb.

Aug 21, 2009 | 2002 Ford SVT Focus

1 Answer

Mitsubishi 3000 gt front sidelight bulb needs replaced need access . not headlight


the turn signal housing has 1 screw you must remove, then you can pull the housing out of the bumper and replace the bulb.

Thank you for your question and please let me know if I could help with anything else.

Apr 06, 2009 | 1991 Mitsubishi 3000GT

2 Answers

Sidelight bulb replacement on 1997 toyota corolla


Remove the screw above the headlamp. Pull the entire side light straight out towards you.

Feb 20, 2009 | 1996 Toyota Corolla

2 Answers

Brake light bulb


hi cjryan 9876 when you look on the outside of the lens there are 2 philips head screws & if open your tail gate there are another 2 philips head screws in there as well one of which is located through the locking tab for the tailgate once you undo these the tail light should fall out & then to get the tail light out of the socket give it a quarter turn anti clock wise

Dec 28, 2008 | 2000 Isuzu Rodeo

3 Answers

Side light bulb change on hyundai terracan


hi there
the solution is simple,
you only need to undo the screw on top of the side light/indicator. then facing the head light place a flat headed screw driver under the bottom lip of side light. the bottom of the lihgt is on a small push fit stud, use a sponge or cloth to protect your bumper paint work then just apply pressure gently to lever side light out towards you, It will come dont worry, you may then change your bulbs if you wish remove the whole light unit you will see the bottom bolt as soon as you release the side light. to replace just push back into place then replace screw. whole job takes about five minutes

hope this helps kevan hildred

Nov 23, 2008 | 2003 Hyundai Tucson

1 Answer

Owners mannual for Isuzu bighorn 3.1, model 199


Hola...podes bajar el manual de usuario desde esta direccion:

http://www.manualesdemecanica.com/en/service-manuals.html?func=select&id=26.

Cualquier problema me podes contactar a lardon01@gmail.com

Nov 19, 2008 | 1997 Isuzu Trooper

Not finding what you are looking for?
2002 Isuzu Trooper Logo

Related Topics:

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

70365 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...