Question about Hyundai Motor 2002 Elantra

2 Answers

VEHICLE SPEED SENSOR

2002 ELANTRA TROUBLE CODE PO501 CHANGED INPUT SENSOR WHERE IS THE OUTPUT SENSOR, DEALERSHIP SAID THERE WAS ONE??????

Posted by on

  • 1 more comment 
  • andresurveys Nov 24, 2008

    input output speed sensor is these are 2 parts or only one and how much could cost for a hyundai xg300 2001

  • Anonymous Mar 19, 2014

    Vehicle speed sensor A circuit low input

  • Anonymous Mar 19, 2014

    Speed sensor A circuit low input

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 276 Answers

The VSS sensor is located on the transaxle .
If the VSS is defective replace the instrument cluster

Posted on Nov 19, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 12 Answers

Output speed sensor is located behind the chalk limestone resident

Posted on Mar 20, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2001 Hyundai Elantra is dying alot the engine light codes are p0720, p0105, p0445


code P105 is manifold absolute pressure barometric pressure circuit. code P0445 evaporative emission system purge control valve circuit shorted. code PO720 AT output speed sensor circuit open or short ground.HAVE MANY CODES COULD BE ECM FAILING HAVE DEALERSHIP CHECK OUT ECM.ECM COULD HAVE SHORT OUT PC BOARD.

Mar 12, 2013 | 2001 Hyundai Elantra

1 Answer

P0715 changed both speed sensors 2002 hyundai elantra still have same code come up


I suspect that your transmission is slipping, you may not feel it yet but the sensors are picking it up in the relative speed signals from the input and output sensor.

Jun 17, 2012 | Cars & Trucks

1 Answer

My 2009 Hyundai Sonata quit accelerating while driving in town. The ESC and check engine light came on. I was able to turn the car off and back on and the ESC light went off and acceleration worked...


This may not be your problem but it does bring the vehicle in fail safe you may have a warranty
Group TRANSAXLE
Number 09-AT-016
Date AUGUST, 2009
Model
1999-SONATA
2001-ELANTRA, SANTA FE & XG
2003-TIBURON
2005-TUCSON
2006-AZERA
2007-ENTOURAGE

Subject
AUTOMATIC TRANSAXLE DIAGNOSTIC TROUBLE CODES P0715, P0716, P0717, P0720, P0721 & P0722

An improperly functioning input speed sensor or output speed sensor may result in the following conditions:
^ "Check Engine" light on
^ Harsh P-R or P-D engagement shock
^ Transaxle in 3rd gear fail-safe
^ Diagnostic trouble codes 1. Using a GDS, check for DTCs in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.
2. From the GDS, select:
^ Vehicle
^ "Auto Transaxle" menu
^ "Current Data"
^ "Input speed sensor" and "output speed sensor". Drive the vehicle and monitor the input and output speed sensors. If the sensors show:
^ Continuous output, the wiring currently has no open/shorts. Go to Step 6.
^ No output, go to Step 3
3. Check the wiring harness visually for an open circuit or short circuit to ground. Check for a pinched harness at the PCM/TCM attachment bolts.
4. Disconnect the connectors at the input and output speed sensor and PCM/TCM. Check for bent pins or pins not fully inserted into the connector.
5. If a harness open/short is found, repair or replace the ECM control harness between the PCM/TCM and transaxle and go to Step 8. If not, go to Step 6.

Aug 22, 2011 | Hyundai Sonata Cars & Trucks

2 Answers

Cod po501 audi a6 2005


Code P0501 is Vehicle Speed Sensor A Range/Performance.

Dec 16, 2010 | Audi A6 Cars & Trucks

1 Answer

P1529 car trouble code?


VSS - Vehicle Speed Sensor problem; great step by step photos of getting to the Elantra Input sensors:

http://www.hyundai-forums.com/index.php?sh...=13320&st=0

Hope helps.

Sep 17, 2010 | 2004 Hyundai Elantra

1 Answer

2002 Dodge Caravan stuck in Limp Mode. Changed input speed sensor, TCM and relays. Help me


Change the output speed sensor as well and clear the vehicle codes either via a scanner or disconnecting the battery.Also make sure the transmission is at the proper fluid level.

Aug 30, 2010 | Dodge Caravan Cars & Trucks

1 Answer

Obd2 trouble codes p0715,p0720,p1529


HI the codes and their respective definitions are below as requested.

P0715 - Input/Turbine Speed Sensor "A" Circuit
P0720 - Output Speed Sensor Circuit
P1529 - Customer Snap Shot Request(Not a essential code or problem)

May 16, 2010 | Hyundai Motor 2003 Elantra

2 Answers

What is code PO501 mean on kia


i have a po501 code is tis an easy repair?

Dec 21, 2009 | 2001 Kia Spectra

1 Answer

Check engine light with following codes p 1529 p0720 p0715


P1529 indicates that your TCM asked the ECM to turn on the check engine lamp.

The range switch and the output speed sensors are the items that are abnormally affecting the operation of the transmission. The diagnostic logic in your computer can distinguish these issues from one another, so you'll definitely want to do both. You have no diagnostic code for the input speed sensor (P0715) listed, so I have made no recommendation to replace it. In my opinion, it's not a labor-intensive repair, so I wouldn't recommend replacing it unless you have reason to believe it's bad.

DTC - P0720 (OUTPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0720 Output shaft speed sensor system
If the output from the output shaft speed sensor is continuously 50% lower than the vehicle speed for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h or more, it is judged to be an open circuit or short-circuit in the output shaft speed sensor and diagnostic trouble code No. P0720 is output. If diagnostic trouble code No. P0720 is output four times, the transmission is locked into 3rd gear or 2rid gear as a fail-safe measure.
Probable cause
Malfunction of the output shaft speed sensor
Malfunction of the transfer drive gear or driven gear
Malfunction of connector
Malfunction of the TCM

DTC - P0715 (INPUT SHAFT SPEED SENSOR SYSTEM)
Code No. P0715 input shaft speed sensor system
If no output pulse is detected from the input shaft speed sensor for 1 second or more while driving in 3rd or 4th gear at a speed of 30 km/h (19 mph) or more, it is judged to be an open circuit or short-circuit in the input shaft speed sensor and diagnostic trouble code No. P0715 is output. If diagnostic trouble code P0715 is output four times, the transaxle is locked into 3rd gear or 2nd gear as a fail-safe measure.
Probable cause
Malfunction of the input shaft speed sensor
Malfunction of the underdrive clutch retainer
Malfunction of connector
Malfunction of the TCM

Is needed replace.

Nov 04, 2009 | 2001 Hyundai Elantra

Not finding what you are looking for?
Hyundai Motor 2002 Elantra Logo

870 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...