Question about 1989 Toyota Pickup SR5

1 Answer

1991 toyota sr5 4x4 brakes slip. We just changed the pads and therotors in the front. Bled the system, good hard pedal but the brakesdon't grab. Was originally told the rotor was glazed, but that isobviously not the problem now. Thanks, Joe

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 86 Answers

Hi! try looking for any leak or moisture on your brake tubings and on the bleeder itself. make sure that only fluid is released from the bleeder when you do the bleeding procedure and no pockets of air in your brake system. make sure your rotor is already touching the back of your brake pads and is slightly pressing the brake disk.

If you have already done this it is now time to check on your brake master.

Posted on Nov 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i adjust the brake pedal on my 2007 Toyota Prius


your rear brakes are shot as they are the tightest
the fronts should grab hard when you press very hard
if they are mushy you need brakes bad
you should fell very comfortable that you have great brakes.
when you press the pedal it should feel strong after 1inch of play
mush means your gonna die or kills someone.
have your brakes bled as a service this will allow them to test them for you at same time . thats the limit you can adjust brakes.

Aug 03, 2014 | 2007 Toyota Prius

4 Answers

Brake pedal goes nearly to floor front pads, calipers, brake hoses changed, rotors turned Master cylinder changed, brake booster check valve changed rear brakes checked, drums good no ridge, shoe's...


I would go with not bled correctly

The booster should hold up with a hard pedal until
you start the engine, then vacuum causes it to move
down when pressing on the brake

Sep 16, 2011 | Saturn SC Cars & Trucks

5 Answers

Brake pedal goes to the floor only when engine is running. Pedal is perfect with engine off.


your power brake booster is blown out
the seal has a leak in it
run the truck for 3 minutes and shut it off. with the windows up listen carefully while you gently apply the brakes
listen for a hissing sound of air leaking.
the sound of these leaking is a very soft sound

Mar 27, 2010 | 1998 Chevrolet K1500

1 Answer

I have a Toyota 1991 XL which have good brake effect in the rear brakes but almost no breaking on the both front brakes. The pedal travels almost to the bottom. I have front discs and rear drums, no...


sounds like you got air in your brake line you need to get them bled also have you checked you master cyliner to make sure it is filled up sometimes that may be all your problem is does the peddle slowly bottom out when braking ..An indication of air in your lines if it bottoms out quick then you better get it in and get you brakes checked

Jan 09, 2010 | 1991 Toyota Previa

1 Answer

Pistons in both front calipers stay out, both calipers replaced


You may have a leak in the booster or master cylinder. You can put a pressure tester on the system to test for leaks. It does sound like you have an air leak.
You can try to bleed the master cylinder, then slave cylinder, then brake lines.

Aug 24, 2009 | 1993 Oldsmobile Achieva

2 Answers

Brakes feel spongy.when pressed hard goes nearly to floor.if pedal released slightly and pressed again feels normal.this is a 1997 toyota caldina GGT with abs.have bled brakes and sgimmed discs.any ideas?


Either you did not bleed the brakes properly or they need adjusted. (rear only) Front most likely are disks. If you put pads on the front and spread the caliper pistons, you should pump the brake pedal 10 or 15 times to move the pistons out. Some ABS systems are notoriously hard to bleed.

Apr 04, 2009 | 1997 Toyota Celica

2 Answers

No brake pedal


first check your brake fluid. It may be low. Having low fluid could have also led to getting air in the brake line. You may need to have your brakes bled. Its not that expensive probably 50-60 bucks at your local garage.

Feb 02, 2009 | 1985 Toyota Pickup

1 Answer

Toyota sr5 brakes slip


Did you adjust the rear brakes?

Nov 10, 2008 | 1989 Toyota Pickup SR5

1 Answer

Peugeot 405 no brake pedal


try a pressure bleeding system on it for the brakes.incidentaly if using the pedal to bleed brakes or getting new pads out to their position gentle use of pedal is advised otherwisw you can reverse the seals in the master cylinder and you wont get any pedal if this happens

Oct 14, 2008 | 1991 Peugeot 405

Not finding what you are looking for?
Cars & Trucks Logo

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

71694 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7031 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...