Question about 2005 Ford F-150

1 Answer

2007 Ford F150 I cannot unlock door to get into truck

When we pruchased the truck used, the door lock was jammed and has never been fixed. This has not been a problem as we use the keyless entry FOB to unlock and enter vehicle. However, this morning neither of the two FOBs we have would unlock the door. The driver door is the only way to unlock door with key and as this is jammed we can not enter truck. Also, the the truck has a combination pad on door to unlock it BUT we were never given the combination. HELP!!!

Posted by on

  • 3 more comments 
  • srmc44 Nov 15, 2008

    Flapveri - Thank you for your response. I failed to mention the alarm and unlock functions on the key fobs still work on both of them, so I assume its not the batteries. Unfortunately, I cann't get into vehicle to get registration or to drive it!! What a jam I'm in. Could I call someone with VIN to get combination for the door??

  • XENIAFL Nov 27, 2008

    The key is in the ignition. Truck is locked. I do not have the combination. HELP!!!

  • Anonymous Mar 17, 2014

    2007 F150 combination code to keyless entry

  • Anonymous Mar 27, 2014

    Trying to program MY keyless fob but the door locks will not work. Lights flash on & off on the dash like it's trying to reset but the locks will not fluctuate.

  • Anonymous Apr 01, 2014

    my talegate won't unlock. it is locked shut and i can't get it unlocked. prior to it not unlocking, while sitting in my truck with ignition off, i heard it unlocking & locking by itself

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Take your registration to dealer and ask them for the code. try changing batteries on key fobs

Posted on Nov 15, 2008

  • darin brown Nov 15, 2008

    you should be able to only problem is proving the vehicle is yours. you could try triple a have them use slim jim or door wedge i have a nice lock out kit if your close to stoneham

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset keyless door entry that is in lock out mode


Viper Keyless Entry Systems

https://www.viper.com/car/keylessentry/
Viper is the industry leader in keyless entry systems. Add the convenience of keylessentry to virtually any vehicle - even vehicles without power door locks!

Alarms, Remote Car Starters, Keyless Entry & Locks - JC ...

www.jcwhitney.com > Audio, Video & Electronics
20 out of 32 products in Alarms, Remote Car Starters, Keyless Entry & Locks ..... ofKeyless Entry & Car Alarms allow you to lock and unlock power door locks.
How to program your keyless entry keypad - Ford Ownerhttps://owner.ford.com/.../locks.../how-to-program...Ford Motor CompanyDiscover how to lock and unlock your doors and how to program memory settings that will adjust seats & mirrors for each driver.SecuriCode™ Keyless Entry Keypad - Ford Ownerowner.ford.com/.../locks.../securicode-keyless-entr...Ford Motor CompanyLearn how to set a 5 digit SecuriCode on the Ford keyless entry keypad. ... Sign out. Register/Sign In · Your Vehicle. Service & Maintenance. Service & .... vehicle's SecuriCode keypad to lock and unlock your doors without having to use a key. ... Thekeypad will go into an anti-scan mode if you enter the wrong code seven ...How Programming Your Keyless Entry Can Make ... - Ford Life

Jan 08, 2016 | Cars & Trucks

1 Answer

2005 Nissan Sentra, the keyless entry locks the doors but does not unlock them.


does your unlock button work in car? If it does, do you have another keyless entry key fob? If so does it work? If you just replaced the battery you can try removing battery and cleaning contacts within remote. I know some of the nissan altimas had the same issue and the only solution was a new key fob. Good Luck

Jan 04, 2013 | 2005 Nissan Sentra 1.8

1 Answer

1996 tl keyless entry


Do you have a keyless entry FOB. If you do replace the battery then program the system. Unlock the doors turn the ignition key to the "ON" position then press either the lock or unlock button of the FOB turn the ignition key off.Now turn the ignition key on again and press either button on the FOB. Turn the ignition off again. Do this 3 times. This initiates programming for the power door locks. Press the lock button of each remote one at a time to be stored in memory. this must be done within 10 seconds of each remote.
3 remotes max. Turn the ignition off and remove the key to complete programming procedure. then test each remote.

Apr 05, 2010 | 1996 Acura TL Series

1 Answer

RS Focus registered yesterday 19th March Keyless entry but remote fobs do not lock or unlock car. The car was driven back yesterday hav ing now covered 114 miles alarm was going off last night but thats...


should not be using fob buttons for entry or locking for emergency only .if keyless entry walk up to car with fob do not press any buttons see if door opens then walk away from car with fob about 20m then go back to car without fob and see if door locked if so all working fine .indicators will not flash if the above dont work take back to main dealer for diagnostics keys may need to be reprogrammed

Mar 20, 2010 | 2009 Ford Focus

1 Answer

The door locks on my F250 work intermittently when using the keyless entry fob.Many times I must manually lock the door after locking with the fob. Do you have some idea what is the prob?


I had this problem on my exploder. From what I remember I located the keyless entry receiver underneath the drivers side dashboard there should be a box with the name SIEMENS on it. This is your keyless entry receiver. Unplug the unit for about 1 hour ( do not know why for an hour ) and plug back in after 1 hour. Should work fine after that.

Jan 28, 2010 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Program fob


Instructions to program a keyless entry remote for a Chevy Silverado. They also work on 2003, 2004 and 2006 Suburbans.
  1. Close all the vehicle doors.
  2. Insert the ignition key into the ignition lock cylinder.
  3. Press and hold the DOOR unlock switch.
  4. While holding the DOOR lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
  5. Release the DOOR unlock switch. The doors will lock and unlock to confirm the program mode.
  6. Press and hold the LOCK button and the UNLOCK button simultaneously on one keyless remote. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
  7. Repeat the previous step to program up to four transmitters.
  8. Turn the ignition switch to the RUN (one more click forward) position in order to exit the keyless entry transmitter mode.
  9. Operate the transmitter functions in order to verify correct system operation

Apr 19, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

1994 keyless entry programing


on the plug in point on the car where they connect scan tool use pin 4 and 8 jump them with papper clip this will cause door locks to lock and unlock then press both lock and unlock buttons on fob and it will take programing then remove paper clip all done.

Nov 27, 2008 | 1994 Pontiac Grand Prix

5 Answers

Mazda MPV 2000


Try "resetting" your keyless entry code. Which is a fancy way of explaining that I broke my keyless entry key fob and had to order a new one. It came w/ instructions explaining how to get the new fob to speak to the car's computer. It was weird (turn key on and off 3 times, open and close door three times, etc. **I'm sure my neighbors were watching and laughing**), but it worked. I'll scan and email you the insrtuctions if you wish. Dan: dcarterlaw@lycos.com

Jul 07, 2008 | 2000 Mazda MPV

Not finding what you are looking for?
2005 Ford F-150 Logo

911 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...