Question about 1994 Ford Ranger Supercab

2 Answers

'94 Ford Ranger XLT Manual Transmission Problem?

I don't know exactly if it's the transmission or what. But either way, when I am accelerating and in gear (foot is not on clutch) it feels as if something is slipping. It's like a stuttering acceleration even at 3,000 RPM. It has no problem shifting from one gear to the next, it's only when it's in gear and I give it gas. Today I put it into 4x4 and it didn't seem to have the problem, so maybe it's in the transfer case?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 33 Answers

For the information given, and assuming forr a 94 it has a bunch of miles, I would bet on a slipping clutch along with a pressure plate that is glazed over. I doubt the transfer case, that's just a chain drive mechanism with nothing much to slip in there. In 2 wheel drive the transfer case drives pretty much straight through and shouldn't add to the problem.

If the clutch has over 80K on it, replace and resurface the pressure plate at the same time.

Does the clutch pedal have about 1/4" of play before it begins to engage? If not adjust the clutch play 1st and see if that helps.

Let me know if you have a further symptoms to share.

Doug

Posted on Nov 15, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Looking through repair receipts, the clutch was replaced at 109,000 miles in 10/06. I purchased the truck used in 3/07, and now have 135,000 miles.

Thanks

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What years of the 4R44E transmission interchange with a 1998 Ford Ranger XLT 3.0?


This transmission was used from 1995 through 2000 models.

Oct 07, 2016 | 1998 Ford Ranger

1 Answer

1996 Ford ranger xlt stutters and jerks when i press the gas


check your plug wires. sounds like u have 1 arching

Sep 18, 2013 | 1996 Ford Ranger SuperCab

1 Answer

Location of the park gear in a 94 Ford Ranger


Get that from ATSG.Com or local
trans parts supplier, that the shops buy from

Jun 21, 2012 | 1994 Ford Ranger Supercab

1 Answer

After my 94 ranger heats up, about 3-4 miles, it starts runniing very rough and stalls when I decelerate


Your torque converter lock-up solenoid is sticking in the "Locked-up" position.

When you accelerate past 1st gear (into 2nd), your transmission "locks-up" to the engine

Apr 17, 2011 | 1994 Ford Ranger Supercab

1 Answer

I have a 1991 ford ranger xlt 4x4 I went to the ford dealer they put it on there computor they cant find the problem they cant even acsess the comp on my truck idels rough and no overdrive can someone help...


transmission modulator valve is clogged. it will not show up on the computer,but will definately make your truck do what its doing. 88-94 rangers hav had technical service bulletins issued by Ford for this issue. Very easy to replace.

Apr 29, 2010 | 1991 Ford Ranger Supercab

1 Answer

2003 Ford Ranger Extended Can 3.0L V-6 Flex Fuel Automatic Transmission. I put a new motor in my little truck and now the transmission acts like its in neutral. I just found out the transmission is...


How do I change the 2003 Ford Ranger XLT 3.0 L Flex Fuel -Auto Trans 2wd Camshaft synchronizer and sensor . Do I need any special tools ? Are there after market parts that are precise replacements for the OEM parts ?

Aug 07, 2009 | Ford Ranger Cars & Trucks

1 Answer

Need clutch replacement directions for Ford Ranger


Remove drive shaft,remove crossmember under transmission.Remove transmission and diconnect linkage.Remove bell housing,and clutch berring assembely.Remove bolts on pressure plate.Once this is done.Remove fly wheel for machineing.you will need a pilot shaft to alighn clutch assemblely.Possible one will come with new clutch and pressure plate.Reverse assemblely in same order remember to torque all your bolts with torque wrench.Take your time.

Apr 19, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
1994 Ford Ranger Supercab Logo

577 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...