Question about 2005 Toyota Matrix
I replaced the airbag on my 2004 Toyota Matrix...but the aitbag light is still on...Can I reset it or does it have to be brought to the dealer...
Sounds like your mechanic installed something per your request. Unfortunately, you have to order the specific part for your vehicle or the light will stay on because the vehicle computer is not detecting a secong airbag.
Posted on Feb 11, 2009
unless you have the proper scaner you can do it but if not you going to have to take it to the dealer and check why is on to proprly repair the problem
Posted on Mar 29, 2009
Under driver and passenger seats are wires that go to seat belt anchors.These are tensioner wires.Unplug the wires from the plug under the seat.clean and replace.Doing this while the ignition is turned off.Then turn ignition back on.In 90% of the time this is your problem.Constant movement of seat causes this or rear passengers kicking plugs off.Good luck phil.
Posted on Jul 10, 2009
Most common SRS fault in XC90's is the driver side SIPS bag (side air bag) located in the side of the seat. The wire runs close to the hinge for the backrest and after working back and forth can break or short.
Posted on Jul 31, 2009
SOURCE: I am trying to reset
If the airbag has been deployed, is is necessary to REPLACE the airbag (SRS) ECU. It is located below the center console. (See picture) It must be replaced because on your vehicle, it contains the crash sensors. If you do not replace it and hook-up new airbags and turn the key on, the new airbags will immediately deploy. There is no way to "reset" it.
Posted on May 24, 2011
Tips for a great answer:
Mar 28, 2013 | 2004 Toyota Matrix
Oct 10, 2012 | 2003 Toyota Matrix
Dec 08, 2010 | 2004 Toyota Prius
Dec 29, 2009 | 2005 Toyota Matrix
Dec 12, 2009 | 2003 Toyota Matrix
Nov 16, 2009 | 2005 Toyota Matrix
Jun 25, 2008 | 2005 Toyota Matrix
1,139 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: