Question about 2000 Hyundai Accent

1 Answer

My 2000 Accent GL is reving into HIGH RPMs! 5 speed 1.5 L

Let me explain in 50 words or less. Back in March my car was doing the "hiccup" thing which got worse and worse and the RPMs were revving up to 4000 when it was idle (especially in the morning when first starting) & it would seem to be stuck at the high RPMs until I would tap on the gas and it would go down. At that time I had the "idle air flow valve" replaced and that sort of seemed to work. FOR A WHILE. Now just then last week my car all of a sudden just stopped being able to shift in the middle of the road and seemed to be stuck in 4th gear. So I got a rebuilt trans. installed & now it is shifting again but the RPM revs and the "hiccup problem" CAME RIGHT BACK THIS MORNING. Now the car is shaking badly when idle & the RPMs are revving again but now really got stuck this morning and I had to tap the gas TWICE to get it to go down. Now it's also idiling @ 2000 RPM and while on the highway tonight the car was really running HEAVY & LOUD and the RPMs rose to 4000 while driving! Are these two issues related or no?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

Check your anti freeze and watch your temp gauge.any check engine light on.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the driving on overdrive mode cause high fuel consumption, because the transmission use the first three ratios mostly?


driving in over drive mode actually is what gives the economy as the engine rpms will be around 300 less than direct drive . Lower rpms = fuel savings
OD should come in around 60 klm/hr and drop out at around 50 klm/hr. When you are accelerating hold the pedal in a set position and watch the rev counter (rpms ) and each gear change you will see the rpms drop and then build back up as the vehicle speed increases At 100klm/hr the revs should be around 3200 rpms or less but if over ( say 3500 rpms) then may be the OD is not coming in. One way to test a box operation is to find a speed shop with a dynomometer and test the gear selections against loads and engine rpms

Dec 23, 2014 | 2000 Audi A6

1 Answer

Fluid capacities and fluid specs


2000 TOYOTA TACOMA 2.7L 4-cyl Engine Code 3RZ-FE

Engine Oil Grade 1......API* All TEMPS......5W-30 Optional ..10W-30
Engine, 2WD, with filter..........5.5 liters
Engine, 4WD, with filter..........5.4 liters

Manual Transmission,......GL-5/ GL-4 All TEMPS......75W-90
Automatic Transmission,A340E......AF3 / A43D......AF3

Differential, Front/ Rear W/ ADRD......GL-5 ALL TEMPS......75W-90
Differential, Front Less ADRD......GL-5 ALL TEMPS......80W-90

Transfer Case,......GL-4/GL-5 ALL TEMPS......75W-90 Gear oil.

Capacity:
Cooling System, Initial Fill..........8.5 liters
Automatic Transmission, A340E Initial Fill..........1.6 liters
Automatic Transmission, A340F Initial Fill..........2 liters
Automatic Transmission, A43D Initial Fill..........2.4 liters
Automatic Transmission, Total Fill
4 speed A340E..........7.2 liters
4 speed A340F..........10.1 liters
4 speed A43D..........6.5 liters
Manual Transmission, ..........2.5 liters
Differential, With ADRD Front..........1.2 liters
Differential, Without ADRD Front..........1.1 liters
Differential, 2WD V6 Rear..........2.6 liters
Differential, 4WD Extra Long Rear..........2.5 liters
Differential, Short WB With LSD Rear..........2.7 liters
Differential, Short WB Without LS Rear..........2.6 liters
Transfer Case, Electronic..........1.2 liters
Transfer Case, STD..........1 liters


Feb 09, 2010 | 2000 Toyota Tacoma PreRunner

1 Answer

RPM's and speed don't match how they should.


Not to sound rude, but, having someone messing with the fuses is a bad thing. There is a Technical Service Bulliten on this issue where the radio cuts out. For the running issue now, I would see a VW tech that knows what he/she is doing.

Jun 11, 2009 | 2002 Volkswagen Jetta TDI

3 Answers

2001 Hyundai Accent high rpms on highway


you need to make sure your trans is shifting to high gear. if not thats why your rpm's are to high.

Jun 11, 2009 | 2001 Hyundai Accent

1 Answer

Installing new brake pads on 2000 hyundai Accent GL


REMOVAL 8118049.gif 1. Remove the lower bolt and lift the caliper assembly up and secure it with a wire or some other retaining method. 2. Remove the pads. CAUTION: Do not depress the brake pedal while disassembling the pads 30c09b4.gif

INSPECTION 1. Check the pads for wear or oil contamination and replace, if necessary. caution_icon.gif The pads for the right and left wheels should be replaced at the same time. Never "drop" or intermix brake pad sets. All four pads must be replaced as a complete set. When replacing the brake pad, check for deformation. When replacing the guide spring, use a new one or the used one after cleaning away foreign material. 2. Check the pad for damage or deformation. Brake pad thickness: Standard value: 9 mm (0.354 in.) Service limited value: 2 mm (0.0787 in.)21873bf.gif
INSTALLATION 1. Install the pad clips. 2. Install the pads onto each pad clip.
3. Insert the piston in the cylinder using the Special Tool (09581-11000).b3dcdee.gif 4. Install the new pads. The shims are attached to each pad as illustrated5efc485.gif caution_icon.gif Be careful so that the disc or pad isn't contaminated by grease. 5. Install the bolt and tighten to the specified value. Tightening torque Guide rod bolt: 22~32 Nm(220~320 kgf·cm, 16~24 lb·ft)

Jun 11, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
2000 Hyundai Accent Logo

650 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...