Question about 1999 Dodge Durango

1 Answer

HORN DOES NOT WORK ON 1999 DODGE DURANGO

MY DURANGO HAD BEEN IN THE SHOP FOR REPAIR AND THE HORN HAS NOT WORKED SINCE WHICH MEANS THE ALARM DOES NOT WORK, COULD THE ALARM BE WHATS CAUSING THE PROBLEM. WE HAD STARTED HAVING A PROBLEM WITH THE REMOTE CAR STARTER, IT WORKS, BUT IT DOESNT CUT OFF LIKE ITS SUPPOSE TO AFTER SO LONG, IT WILL JUST KEEP ON RUNNING UNTIL WE CUT IT OFF OR RUN OUTTA GAS. COULD IT BE A FUSE, HELP! THANKS

Posted by on

  • PRECIOUSQUE Nov 16, 2008

    Thanks, will definitely try the fuse, If I can find it!! lol

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

The horn is a simple circuit. Check your fuse, and see if you get power to the horn itself. The remote start and alarm are separate problems, and probably need a technician to straighten out.

Posted on Nov 15, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panic alarm does not work. Locksmith verified that it is not the remote fobs.


central timer module" - Dodge Dakota Forum

www.dodgedakota.net/boards/gen/21983.html

Jan 2, 2009 - 21 posts - ‎18 authors
I have a Dak 2000 3.9 Ltr V6, Single Cab, Bare Bones. ... Panic Mode .... ooops....i mean the remote entry and alarm system does NOT work ... i have a 2002 dakata where can i buy a ctm looked all over nobody sell them can thay be rebuilt ... I was out the door $550.00, and they washed the truck also.

Truck wont work/Key Fob won't work/wont start/wont do anything ...

www.ramforumz.com > ... > Electrical

Apr 10, 2010 - 10 posts
Truck wont work/Key Fob won't work/wont start/wont do anything! ... Maintenance & Repair > 3RD Generation Dodge Ram - 2002 to 2008 Dodge Ram Trucks > Electrical... Soon as I manually unlock the door, and open it.... the factory panic alarm starts going off. .... Vehicle: 2004 Dakota Club Cab 4X4.

alarm going off when opening the door.. embarrassing and annoying ...

www.cumminsforum.com > ... > 3rd Gen. Non-Powertrain

Jan 12, 2012 - 11 posts - ‎9 authors
how do I stop my trucks alarm from going off when I open the door? it did it ... to thetruck and opened driver door (it was unlocked) and the alarm started going off. ... I do not have a remote unlocking device (or it doesnt work) so I do all .... alarm will go off then I have to use the FOB panic button to shut it off.

Keyless entry/panic button/alarm - Dakota Durango Forum

www.dakota-durango.com > ... > Gen III Dakotas

Jan 10, 2016 | 2002 Dodge Dakota Club Cab

1 Answer

My alarm wont shut off on my 1999 Durango,how to disarm it...


you may have to goto the shop to have it bypassed/ removed if this is an aftermarket unit... they'll remove the brain and reconnect the open wires

Mar 19, 2015 | 1999 Dodge Durango

1 Answer

Horn doesn't blow but does with alarm


Usually a sign the horn pad under the air bag is not working, or a wiring problem between the horn pad and the horn relay.

Sep 20, 2012 | 1999 Dodge Caravan

1 Answer

How to disable alarm on 1999 dodge durango


Battery removal will not work. What will work is this: Use key to lock and then unlock driver's side door. I unclipped both horns at passenger side of engine compartment at front because they will go off while you are doing this procedure. I used this procedure last night after a rear passenger accidentally set of my alarm. I know this works! My vehicle is a 99' Durango.

Apr 30, 2012 | 1998 Dodge Durango

1 Answer

I have a 2001 dodge durango. the horn works when i set the alarm but does not work from the steering wheel at all.


The horn has power all of the time but does not go off untill it is grounded. The switch in the steering wheel is the ground when you press it completing the circuit and sounding the horn. The alarm does not use the steering column or steering wheel ground path to "beep" the horn, it uses its own ground. The problem then will more than likely be in the steering column, steering wheel switches, or clock-spring. The clock spring is not for the clock. It is a spiral-wound wire set that allows the steering wheel to turn and not bind up the wires going into the steering wheel. It is called a clock-spring due to the "spiral" wound design of the connector. The horn ground wire in the steering wheel gets its connection through this clock-spring, so it may the source of your problem. It would require some electrical diagnostics to verify the actual point of failure.

Mar 31, 2011 | 2001 Dodge Durango

1 Answer

My 2001 dodge durango 4.7 4dr.2wheel dr. alarm system will not turn off horn honks and lights flash. help !!


Try unlocking the driver side door manually with the key. This works on some car alarm systems.

Oct 13, 2010 | 2001 Dodge Durango

1 Answer

1999 Durango 5.9 horn doesn't work from steering wheel but does when setting the factory car alarm. (I assume it's the same horn.)


If it is the same horn, there is probably something in the area where you push to activate the horn. The horn itself is obviously working so there is no fuse problems, most likely your problem is in the steering wheel.

Aug 09, 2010 | 1999 Dodge Durango

1 Answer

1999 dodge durango wont start


may work may not...on older cars when the starter went bad and the car wouldn't start you could tap the starter with a long screwdriver or hammer lightly and the solenoid would engage and start the car but you need to get it home or to shop cause it wouldn't work again..if you try this and the starter engages then the starter needs to be replaced if you haven't already tried..if the lights are flashing when you try to start the vehicle then o would say its prob a malfunctioning alarm system..try to diengage it by pulling fuse for alarm..don't know if you can though..check the starter...good luck

Apr 12, 2010 | 1999 Dodge Durango

3 Answers

2000 dodge durango 5.9 my horn and cruise control don't work. the fuses are good.


disconnect the plug to the horn then install a new fuse if the fuse does not blow out replace the horn. Do the reverse if the fuse does not blow out to the cruise. if the cruise is blowing fuses the unit may be seized up somewhere maybe the cable or actuator is corroded.

Jul 03, 2009 | 1999 Dodge Durango

1 Answer

1999 dodge durango horn does not work.


First thing I need to ask is are you having problems with your cruise control also? If so the problem is more than likely the clock spring. It is located behind the steering wheel and allows for the connection between the steering wheel and the wiring harness to stay in place when the wheel is turning. I have replaced 1 on a 2000 Durango and at least 4 others on different Mopar vehicles.

Feb 14, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
1999 Dodge Durango Logo

381 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...