This can be dangerous. If you are not sure, don't do it. Hooking up to the wrong port can cause the can to explode and injure you seriously. Get help from someone locally, don't risk getting hurt by possible wrong advice from the internet.
SOURCE: obd II location problems...
Front seating area, driver side, under dash, mounted above kick panel
SOURCE: Location under hood for fuel pump relay on 2002 Mazda Millenia S
JUST RELEASE THE PRESSURE AT THE FUEL PRESSURE TEST PORT ON THE FUEL SUPPLY RAIL THAT SUPPLIES THE INJECTORS, IT IS A METAL VALVE LIKE A TIRE VALVE, THAT IS THE FACTORY RECOMMENDED METHOD..
SOURCE: how can i fix my mazda 626 transmission range
The transmission range sensor aka neutral safety switch is located underneath the air filter on top of the transaxle and very easy to access. Replace this part (around $50) and it will solve your problem.
What happens is this, when your tranny warms up, it disperses heat to the sensor switch and if its faulty or worn out, will send faulty relays to the transmissiom computer module (TCM) and makes the transmission shift irratically (OD to 3rd and back while driving at freeway speeds). You tranny is not overheating like most people believe, its the switch. Mechanics are telling alot of people that their tranny needs replaced. Watch Out For These People!! They only want your money!!
SOURCE: i'm looking for the firing order on a 2001 Mazda
Some one has probably changed the engine if everything on the net does not match. What is the engine designation that is on the valve cover so we can help you.
Usual Mazda firing order 1 3 4 2 (4 cyl most any make)
2.2L Same
2.6L Same
3.0L (V6) 1 2 3 4 5 6
SOURCE: I need a 2001 Mazda
Hi! There seems to be no site for a 2001 mazda 626 cylinder repair. Try haynes or chilltons manual from the bookstore or autoparts supply. Hope this helps and have a good one!
Testimonial: "Thanks"
238 views
Usually answered in minutes!
Where would I put Freon into a 2001 mAZDA 626?
×