An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert that has over 10,000 points.
Re: 2006 ford taurus cruise control not working
I would get the owners manual out and find out where the fuse is for the cruise control cause there is a pickup switch for the cruise under the hood by the throttle body when it is engaged you don't have to have your foot on the pedal
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would think the clock spring is bad ,the clock spring is ribbon wire wound in side a plastic body inside top of steering column. The steering wheel has to be removed to get at it. It is used so you can turn the steering with out losing power for the horn and cruise control. How cars clock spring works
Once you have turned your cruise control on accelerate to desired speed press SET button on right hand side of steering wheel before lifting foot from accelerator, then remove foot from accelerator. pushing RESUME button will deactivate cruise control without turning it off. Then when clear of traffic push resume again to activate cruise control. It will automatically resume to previous set speed.
sounds like a bad clockspring. located in steering column under steering wheel, operates airbag, horn cruise etc, it make wire connection possible so the wheel can spin, its a roll of flat wires, that unroll and roll up as steering wheel is truned from left to right,wires break after a while.
the fuse panel is under the plastic panel on the left of the steering wheel, the cruise does not have a deicated fuse, it is controlled by the powertrain control module, if the truck runs the cruise has power, the most common cause of the cruise being inop is he rotating contact under the steering wheel, it is called the clock-spring contact
check your on and off button at the steering wheel.
use a multi-meter set in the ohm postion and see if there is conectivity as you push each button. you will have to take the button off the steering wheel but it will take
just a few minites. while your at it you can check the right side also.