Question about 2000 Ford Windstar

2 Answers

Need know which cylinder is number one on 2000 ford windstar 3.8

If i have right cylinder have replaced plug and wire and still getting cylinder one misfire

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 1996 ford wind star van. On the computer it says the #1 cylinder is misfiring. When the van goes over 80 kms it misfires really bad. Does anyone know what I should do? I have replaced the spark plugs, coil

Posted on Dec 03, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 341 Answers

#1 plug is the 1st plug on passenger side by firewall

Posted on Nov 15, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need wiring diagram for the spark plugs on a 2001 ford Windstar V-6;3.8L


1-4-2-5-3-6


Cylinder numbering:

  • Windshield side
    1--2--3
    4--5--6
    Frt. Of vehicle




Coil numbering:
    • --4 PIN--
      ----------------
      --1--- 2--- 3--
      ----------------
      --5--- 6--- 4--

Feb 12, 2015 | 2001 Ford Windstar

1 Answer

2003 ford windstar spark plug wires diagram


I\'m assuming you have the 3.8 engine,although i believe the firing order is the same on all there v6 sideways mounted front wheel drive Windstars. That firing order is 1-4-2-5-3-6, with 1-2-3 going from left to right on the back side of the engine and 4-5-6 left to right on the front side of the engine.Looking straight down at the coil from the front of the car,you\'ll see 2 rows of coil terminals.The row on the right side is 1-2-3 going from top to bottom,row on left side is 6-5-4 going from top to bottom. Hook the number 1 coil terminal to the number 1 spark plug ,being careful to use the spark plug wire that is closest in length to the length you need. If your just replacing wires,yuo shouldn\'t have to much trouble. If your nreplacing the spark plugs you will find the ones in the rear,especially the number 2 [the middle one} are pretty difficult without removing the cowling. A total pain brought to you by the designers at Ford!

Jun 04, 2014 | 1998 Ford Windstar

1 Answer

I have a 2000 ford windstar 3.8 im having truble with cylinder#5 it has a new spark plug and a new fuel injector


Is it a plug wire or coil on plug system? More than likely it is a plug wire or a boot for coil on plug. If the latter you should replace all at the same time. Same applies for plug wires if over 60,000 miles. Buy the expensive ones, if you don't you will regret it in 15 to 20 thousand miles.

May 02, 2014 | 2000 Ford Windstar

1 Answer

CHUGGING ALONG WITH FLASHING CHECK ENGINE LIGHT....???? 2002 FORD WINDSTAR WHERE TO BEGIN


A flashing Check Engine light means you have a ignition Misfire, start by replacing the spark plugs and spark plug wires, one or more is defective. If you have a electronic engine control fault code reader the cylinder or cylinders that are misfiring will set a fault code, the codes are P0300-P0306, the last number being the number of the cylinder ( cylinders 1-6) the computer has detected a misfire in.

Apr 18, 2011 | 2002 Ford Windstar Cargo

1 Answer

Changed the spark plugs and wires on 1996 ford windstar 3.8 liter V6 put the wires back wrong. runs not right


STANDING IN FRONT OF VAN FRONT CYLINDERS FACING YOU LEFT TO RIGHT IS 4 5 6 BACK CYLINDERS LEFT TO RIGHT IS 1 2 3 GET A PIECE OF PAPER WRITE NUMBER 51 THEN WRITE NUMBER 62 UNDER 51 THEN WRITE NUMBER 43 UNDER 62 THATS YOUR COIL PACK WIRES LOCATION MATCH THEM WITH THE CYLINDER SPARK PLUGS YOU HOME FREE.

Oct 23, 2010 | Ford Windstar Cars & Trucks

2 Answers

What is the wireing order for spark plugs in a 2000 ford windstar se. The front of vehicle has a short, medium, long wire. Where does each wire go in relation to the coil pack in rear of engine. Thank you!


The correct firing order diagram for that vehicle is not an easy task to come up with, but try this diagram and it should be the right firing order diagram for that vehicle. Let me know if this does not work out.


338329d.jpg

Jul 27, 2010 | 2000 Ford Windstar

1 Answer

What order do i put back spark plugs wire in a 2000 ford windstar


For the 3.8L V-6
Firing Order:
1-4-2-5-3-6
Cylinders:
(back of engine)
3----------6
2----------5
1----------4
(front of engine)
Ignition Connections:
(back)
3....4
2....6
1....5
(front)

Let me know if this helped....

Mar 13, 2010 | 2001 Ford Windstar

2 Answers

P0302 #2 cylinder miss fire code. Replaced plugs and wires but at 40 mph runs very rough. Idles smoothly but not when put in gear.


I have a 1999 ford escort 2.0, its got a miss on cylinder 3 and 4. I changed the wires and the coil pack but its still missing. When scanned I get code p1506, p0303 and p0304

Jan 02, 2010 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

Related Topics:

473 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...